{"title":"Shrink Packaging Equipment","description":"\u003cp\u003eShrink packaging equipment wraps products in film and shrinks it tight with heat, for a clean, tamper-evident and dust-proof pack. This collection brings together Maripak and AIE L-bar sealers, hood sealers, side sealers, shrink tunnels, PE shrink bundlers and conveyors, from starter systems to fully automatic lines.\u003c\/p\u003e","products":[{"product_id":"maripak-compack-5800i-hood-shrink-sealer","title":"Maripak Compack 5800i Hood Shrink Sealer, 23\" × 17\"","description":"\u003cp\u003eThe Maripak Compack 5800i is a hood shrink sealer that seals and shrinks in the same chamber, for small to medium daily volumes. The product is placed in center-folded film; when the operator closes the hood, the machine seals the film and shrinks it around the product.\u003c\/p\u003e\n\u003cp\u003eNo separate shrink tunnel and no compressed air are needed. The 5800i is the entry model of the Compack series, with a 23″ × 17″ seal area and a 10″ high chamber for products up to 6″ high. Per Maripak, it wraps about 5–10 packs per minute.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e200–240V single-phase, 25 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeal and shrink in one step and one chamber: no separate tunnel to buy, power or find floor space for\u003c\/li\u003e\n\u003cli\u003eDigital control panel for sealing time, shrink time and temperature, so each product gets its own settings\u003c\/li\u003e\n\u003cli\u003eMagnetic holder keeps the hood closed during the cycle; adjustable perforators let air escape while the film shrinks\u003c\/li\u003e\n\u003cli\u003eHeight-adjustable mesh tray to place the seal line at mid-height of the product for a neat finish\u003c\/li\u003e\n\u003cli\u003eCan also bag products without shrinking by switching the fan off\u003c\/li\u003e\n\u003cli\u003eRuns without compressed air on 200–240 V single-phase, 25 A; on wheels to move within your facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmall manufacturers starting with shrink packaging at 5–10 packs per minute\u003c\/li\u003e\n\u003cli\u003eRetail and gift packers wrapping boxes, sets and multipacks\u003c\/li\u003e\n\u003cli\u003eBakeries and food producers wrapping boxed or trayed products up to 6″ high\u003c\/li\u003e\n\u003cli\u003ePrint and stationery businesses wrapping books, cards and stacks\u003c\/li\u003e\n\u003cli\u003eWorkshops without compressed air or room for a separate shrink tunnel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e5–10 packs\/min (per Maripak; depends on package size and film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e12\" standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF: 7-37, PVC: 15-25 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product height\u003c\/th\u003e\n\u003ctd\u003e6\" standard (taller chamber available as an option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e200–240V single-phase, 25 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e5 kW \/ 3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChamber size\u003c\/th\u003e\n\u003ctd\u003e23 × 17 × 10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e31 × 47 × 30\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e265 lbs \/ 350 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTaller chamber for products up to 13.5\" high\u003c\/li\u003e\n\u003cli\u003eStainless steel version for wet or damp environments\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960169976146,"sku":"MPK-5800I","price":3595.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/M-5800i_01.jpg?v=1791317144"},{"product_id":"maripak-compack-5800hc-high-chamber-hood-shrink-sealer","title":"Maripak Compack 5800HC High-Chamber Hood Shrink Sealer, 23\" × 17\"","description":"\u003cp\u003eThe Maripak Compack 5800HC is a high-chamber hood shrink sealer for taller products. It seals and shrinks in the same chamber: the operator places the product in center-folded film, closes the hood, and the machine seals the film and shrinks it around the product.\u003c\/p\u003e\n\u003cp\u003eIt has the same 23″ × 17″ seal area as the 5800i, but a 16″ chamber for products up to 13″ high, depending on the other product dimensions. No separate tunnel and no compressed air are needed. Per Maripak, it wraps about 5–10 packs per minute.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e208–240V single-phase, 25 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTall 16″ chamber for products up to 13″ high, such as bottles, jars and stacked boxes\u003c\/li\u003e\n\u003cli\u003eSeal and shrink in one step: no separate tunnel needed\u003c\/li\u003e\n\u003cli\u003eDigital control panel for sealing time, shrink time and temperature\u003c\/li\u003e\n\u003cli\u003eMagnetic hood holder, adjustable perforators and a height-adjustable mesh tray for a centered seal line\u003c\/li\u003e\n\u003cli\u003eTakes film up to 24″ wide; can bag without shrinking with the fan switched off\u003c\/li\u003e\n\u003cli\u003eNo compressed air; 208–240 V single-phase, 25 A; on wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBeverage and specialty food producers wrapping tall bottles and jars\u003c\/li\u003e\n\u003cli\u003eGift basket and kit makers with tall assortments\u003c\/li\u003e\n\u003cli\u003eCosmetics and home goods brands wrapping tall boxes\u003c\/li\u003e\n\u003cli\u003eSmall manufacturers with products too tall for a standard 6″ hood sealer\u003c\/li\u003e\n\u003cli\u003eShops without compressed air or room for a tunnel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e5–10 packs\/min (per Maripak; depends on package size and film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e10\" standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF: 7-37, PVC: 15-25 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product height\u003c\/th\u003e\n\u003ctd\u003e13\" (depending on the other product dimensions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e208–240V single-phase, 25 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e5 kW \/ 3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChamber size\u003c\/th\u003e\n\u003ctd\u003e23\" × 17\" × 16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e31\" × 48\" × 45\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e285 lbs \/ 375 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless steel version for wet or damp environments\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960170271058,"sku":"MPK-5800HC","price":4695.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/M-5800HC_01.jpg?v=1791317124"},{"product_id":"maripak-compack-5800mc-hood-shrink-sealer-automatic-discharge","title":"Maripak Compack 5800MC Hood Shrink Sealer with Automatic Discharge, 23\" × 17\"","description":"\u003cp\u003eThe Maripak Compack 5800MC is a hood shrink sealer with an automatic discharge conveyor. Like the other Compack models it seals and shrinks in the same chamber, but the finished package is carried out of the chamber automatically, so the operator can prepare the next pack right away.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, this raises the output to about 7–12 packs per minute, compared with 5–10 for the manually unloaded models. The seal area is 23″ × 17″, the chamber is 10″ high for products up to 6″. No tunnel and no compressed air are needed.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e208–240V single-phase, 35 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomatic discharge conveyor moves the finished pack out of the chamber\u003c\/li\u003e\n\u003cli\u003eAbout 7–12 packs per minute per Maripak, depending on package size and film\u003c\/li\u003e\n\u003cli\u003eSeal and shrink in one step in the same chamber\u003c\/li\u003e\n\u003cli\u003eDigital control panel for sealing time, shrink time and temperature\u003c\/li\u003e\n\u003cli\u003eAdjustable perforators and a height-adjustable mesh tray for a clean, centered seal\u003c\/li\u003e\n\u003cli\u003eNo compressed air; 208–240 V single-phase, 35 A; on wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGrowing producers that need more packs per hour from a hood sealer\u003c\/li\u003e\n\u003cli\u003eFood producers wrapping trays and boxed goods in daily runs\u003c\/li\u003e\n\u003cli\u003eRetail and e-commerce packers wrapping multipacks and bundles\u003c\/li\u003e\n\u003cli\u003eOperations that want hood sealer simplicity with less handling\u003c\/li\u003e\n\u003cli\u003eFacilities without compressed air or room for a separate tunnel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e7–12 packs\/min (per Maripak; depends on package size and film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e12\" standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF: 7-37, PVC: 15-25 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product height\u003c\/th\u003e\n\u003ctd\u003e6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e208–240V single-phase, 35 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e6 kW \/ 4 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChamber size\u003c\/th\u003e\n\u003ctd\u003e23 × 17 × 10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e37 × 67 × 34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e315 lbs \/ 390 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless steel version for wet or damp environments\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960171254098,"sku":"MPK-5800MC","price":7995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/C-5800MC_01.jpg?v=1791316889"},{"product_id":"maripak-lmc-5844-m-semi-automatic-l-bar-sealer","title":"Maripak LMC 5844-M Semi-Automatic L-Bar Sealer, 23\" × 17\"","description":"\u003cp\u003eThe Maripak LMC 5844-M is a semi-automatic L-bar sealer for shrink packaging at small to medium volumes. An electric motor closes the sealing bar, so the machine needs no compressed air. Per Maripak, it wraps about 10–15 packs per minute, depending on package size and film.\u003c\/p\u003e\n\u003cp\u003eThe 5844-M has a 23″ × 17″ seal area and takes film rolls up to 20″ wide. After sealing, the pack passes through a heat shrink tunnel, which is selected to match the pack size and output.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 20 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMotor-driven sealing bar: no compressed air supply needed\u003c\/li\u003e\n\u003cli\u003eAutomatic mode (the bar cycles at a set interval) or free mode (triggered by a button)\u003c\/li\u003e\n\u003cli\u003eMaripak I-Sealing System: controlled heating of the sealing wire for consistent seals\u003c\/li\u003e\n\u003cli\u003eTouchscreen with a library to store and recall the setup for each package\u003c\/li\u003e\n\u003cli\u003eSafety sensor stops the cycle when an obstacle is detected\u003c\/li\u003e\n\u003cli\u003eLow-mounted film cradle for easy film loading; on wheels; 220 V single-phase, 20 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturers moving from hood sealers to an L-bar and tunnel line\u003c\/li\u003e\n\u003cli\u003eFood producers wrapping trays, boxes and multipacks up to 40 lb\u003c\/li\u003e\n\u003cli\u003eE-commerce and retail packers bundling products for shipping\u003c\/li\u003e\n\u003cli\u003ePrint, toy and household goods producers with daily shrink packaging\u003c\/li\u003e\n\u003cli\u003eFacilities without compressed air that want a motor-driven L-bar instead of a pneumatic one\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10–15 packs\/min (per Maripak; depends on package size and film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF: 30-120 gauge - 7-37 micron \/ PVC: 60-100 gauge - 15-25 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e23\" × 17\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 20 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e2 kW \/ 1.4 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product weight\u003c\/th\u003e\n\u003ctd\u003e40 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e30 × 59 × 47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e37 × 67 × 49\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e326 lbs \/ 366 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomatic trim winder\u003c\/li\u003e\n\u003cli\u003eExtended gravity discharge conveyor\u003c\/li\u003e\n\u003cli\u003eFoot pedal\u003c\/li\u003e\n\u003cli\u003eTaller chamber for products up to 13.5\" high\u003c\/li\u003e\n\u003cli\u003eStainless steel version for wet or damp environments\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960171385170,"sku":"MPK-LMC-5844-M","price":10425.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/LMC5844_01.jpg?v=1791317070"},{"product_id":"maripak-lmc-8065-m-semi-automatic-l-bar-sealer","title":"Maripak LMC 8065-M Semi-Automatic L-Bar Sealer, 31\" × 26\"","description":"\u003cp\u003eThe Maripak LMC 8065-M is a semi-automatic L-bar sealer for larger packages. An electric motor closes the sealing bar, so the machine needs no compressed air. Per Maripak, it wraps about 10–15 packs per minute, depending on package size and film.\u003c\/p\u003e\n\u003cp\u003eThe 8065-M has a 31″ × 26″ seal area, takes film rolls up to 28″ wide and handles products up to 50 lb. After sealing, the pack passes through a heat shrink tunnel sized for the larger packages.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 25 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge 31″ × 26″ seal area for bigger boxes, trays and bundles\u003c\/li\u003e\n\u003cli\u003eMotor-driven sealing bar: no compressed air supply needed\u003c\/li\u003e\n\u003cli\u003eAutomatic or free mode, Maripak I-Sealing System for consistent seals\u003c\/li\u003e\n\u003cli\u003eTouchscreen with a library of package setups\u003c\/li\u003e\n\u003cli\u003eSafety sensor stops the cycle when an obstacle is detected\u003c\/li\u003e\n\u003cli\u003eFilm up to 28″ wide; products up to 50 lb; 220 V single-phase, 25 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProducers of larger boxed goods and bundles that outgrow a 23″ × 17″ seal area\u003c\/li\u003e\n\u003cli\u003eFood and beverage multipacks that exceed a 23″ × 17″ seal area\u003c\/li\u003e\n\u003cli\u003eHome goods and hardware packers with bulky items up to 50 lb\u003c\/li\u003e\n\u003cli\u003eE-commerce fulfillment wrapping kits and bundles so the parts stay together in transit\u003c\/li\u003e\n\u003cli\u003eFacilities without compressed air that need a larger L-bar on standard single-phase power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10–15 packs\/min (per Maripak; depends on package size and film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF: 30-120 gauge - 7-37 micron \/ PVC: 60-100 gauge - 15-25 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e31\" × 26\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e28\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 25 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e2.4 kW \/ 1.8 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product weight\u003c\/th\u003e\n\u003ctd\u003e50 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e43 × 81 × 47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e51 × 91 × 49\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e443 lbs \/ 498 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomatic trim winder\u003c\/li\u003e\n\u003cli\u003eExtended gravity discharge conveyor\u003c\/li\u003e\n\u003cli\u003eFoot pedal\u003c\/li\u003e\n\u003cli\u003eTaller chamber for products up to 13.5\" high\u003c\/li\u003e\n\u003cli\u003eStainless steel version for wet or damp environments\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960171942226,"sku":"MPK-LMC-8065-M","price":13990.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/LMC8065-M_01.jpg?v=1791317081"},{"product_id":"maripak-lmc-9565-m-semi-automatic-l-bar-sealer","title":"Maripak LMC 9565-M Semi-Automatic L-Bar Sealer, 35.5\" × 25.5\"","description":"\u003cp\u003eThe Maripak LMC 9565-M is the largest semi-automatic L-bar sealer in the LMC series. An electric motor closes the sealing bar, so no compressed air is needed. Per Maripak, it wraps about 10–15 packs per minute, depending on package size and film.\u003c\/p\u003e\n\u003cp\u003eThe 9565-M has a 35.5″ × 25.5″ seal area, takes film rolls up to 34″ wide and handles products up to 55 lb. After sealing, the pack passes through a heat shrink tunnel sized for large packages.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 25 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLargest LMC seal area: 35.5″ × 25.5″, for packs that do not fit the 5844 or 8065 models\u003c\/li\u003e\n\u003cli\u003eFilm rolls up to 34″ wide; products up to 55 lb on the sealing table\u003c\/li\u003e\n\u003cli\u003eMotor-driven sealing bar: no compressed air needed\u003c\/li\u003e\n\u003cli\u003eAutomatic or free mode; Maripak I-Sealing System with controlled wire heating for consistent seals\u003c\/li\u003e\n\u003cli\u003eTouchscreen with a library of package setups, and a safety sensor that stops the cycle on an obstacle\u003c\/li\u003e\n\u003cli\u003e220 V single-phase, 25 A; on wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge boxes, trays and bundles that do not fit smaller L-bars\u003c\/li\u003e\n\u003cli\u003eFurniture, home goods and hardware packers protecting products from dust and scratches\u003c\/li\u003e\n\u003cli\u003eBeverage and food producers with large multipacks\u003c\/li\u003e\n\u003cli\u003eManufacturers wrapping kits and assemblies so all parts ship as one unit\u003c\/li\u003e\n\u003cli\u003eFacilities without compressed air that need the largest semi-automatic L-bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10–15 packs\/min (per Maripak; depends on package size and film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF: 30-120 gauge - 7-37 micron \/ PVC: 60-100 gauge - 15-25 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e35.5\" × 25.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 25 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e2.6 kW \/ 2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product weight\u003c\/th\u003e\n\u003ctd\u003e55 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e43 × 89 × 47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e51 × 102 × 49\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e478 lbs \/ 536 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomatic trim winder\u003c\/li\u003e\n\u003cli\u003eExtended gravity discharge conveyor\u003c\/li\u003e\n\u003cli\u003eFoot pedal\u003c\/li\u003e\n\u003cli\u003eTaller chamber for products up to 13.5\" high\u003c\/li\u003e\n\u003cli\u003eStainless steel version for wet or damp environments\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960172368210,"sku":"MPK-LMC-9565-M","price":16835.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/LMC9565-M_01.jpg?v=1791317093"},{"product_id":"maripak-tmc-pro-5844-m-l-bar-sealer-shrink-tunnel-combo","title":"Maripak TMC Pro 5844-M L-Bar Sealer and Shrink Tunnel Combination, 23\" × 17\"","description":"\u003cp\u003eThe Maripak TMC Pro 5844-M combines a semi-automatic L-bar sealer and a heat shrink tunnel in one machine. The pack is sealed and then carried straight into the tunnel, so you get a complete shrink line in one footprint.\u003c\/p\u003e\n\u003cp\u003eAn electric motor closes the sealing bar, so no compressed air is needed. Per Maripak, it wraps about 10–12 packs per minute. The seal area is 23″ × 17″, and the maximum product size is 12″ × 18″ × 7″ (W × L × H). It runs on 220 V single-phase, 50 A.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 50 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eL-bar sealer and heat shrink tunnel in one machine: one footprint, one power connection\u003c\/li\u003e\n\u003cli\u003eMotor-driven sealing bar: no compressed air needed\u003c\/li\u003e\n\u003cli\u003eAutomatic or free mode; safety sensor stops the cycle on an obstacle\u003c\/li\u003e\n\u003cli\u003eAutomatic trim winder included to collect the film scrap\u003c\/li\u003e\n\u003cli\u003eTunnel with adjustable conveyor and fan speed, digital PID temperature control and airflow side flaps\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 158 °F before switch-off, plus over-temperature protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmall and medium producers that want a complete shrink line in one machine, with one supplier for sealer and tunnel\u003c\/li\u003e\n\u003cli\u003eFood, cosmetics and retail packers with products up to 12″ × 18″ × 7″\u003c\/li\u003e\n\u003cli\u003eBusinesses moving up from a hood sealer that need more packs per hour\u003c\/li\u003e\n\u003cli\u003eFacilities without compressed air\u003c\/li\u003e\n\u003cli\u003ePacking rooms with limited floor space\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10–12 packs\/min (per Maripak; depends on package size and film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product height\u003c\/th\u003e\n\u003ctd\u003e7\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF: 7-37 micron \/ PVC: 15-25 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e23\" × 17\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product size (W × L × H)\u003c\/th\u003e\n\u003ctd\u003e12\" × 18\" × 7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 50 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e11 kW \/ 6 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e37 × 91 × 63\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e45 × 98 × 71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e1080 lbs \/ 1235 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCrated weight\u003c\/th\u003e\n\u003ctd\u003e2400 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFoot pedal\u003c\/li\u003e\n\u003cli\u003eTunnel conveyor belt alternatives: metal mesh, Teflon mesh or heat-resistant plastic modular belt\u003c\/li\u003e\n\u003cli\u003eStainless steel version for wet or damp environments\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960172466514,"sku":"MPK-TMC-PRO-5844-M","price":13890.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/TMC5844-M_01.png?v=1791316861"},{"product_id":"maripak-tmc-pro-8065-m-l-bar-sealer-shrink-tunnel-combo","title":"Maripak TMC Pro 8065-M L-Bar Sealer and Shrink Tunnel Combination, 32\" × 26\"","description":"\u003cp\u003eThe Maripak TMC Pro 8065-M combines a semi-automatic L-bar sealer and a heat shrink tunnel in one machine, with a large 32″ × 26″ seal area. The pack is sealed and carried straight into the tunnel for shrinking.\u003c\/p\u003e\n\u003cp\u003eAn electric motor closes the sealing bar, so no compressed air is needed. Per Maripak, it wraps about 10–12 packs per minute and takes film up to 28″ wide. It runs on 220 V three-phase, 40 A. The maximum product size is available on request.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 40 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eL-bar sealer and heat shrink tunnel in one machine with a 32″ × 26″ seal area\u003c\/li\u003e\n\u003cli\u003eMotor-driven sealing bar: no compressed air needed\u003c\/li\u003e\n\u003cli\u003eAutomatic or free mode with safety sensor\u003c\/li\u003e\n\u003cli\u003eAutomatic trim winder included\u003c\/li\u003e\n\u003cli\u003eTunnel with adjustable conveyor and fan speed, digital PID temperature control and airflow flaps\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 158 °F before switch-off; 220 V three-phase, 40 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProducers of larger packs who want sealer and tunnel in one machine instead of two units to align\u003c\/li\u003e\n\u003cli\u003eFood and beverage multipacks and large trays up to the 32″ × 26″ seal area\u003c\/li\u003e\n\u003cli\u003eHome goods and hardware packers with bulky products that need a tight, clear wrap\u003c\/li\u003e\n\u003cli\u003eFacilities with a three-phase supply and no compressed air\u003c\/li\u003e\n\u003cli\u003eOperations replacing separate sealer and tunnel units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10–12 packs\/min (per Maripak; depends on package size and film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF: 7-37 micron \/ PVC: 15-25 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e32\" × 26\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e28\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 40 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e11 kW \/ 6 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e52\" × 130\" × 49\" without gravity conveyor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e66\" × 142\" × 55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet weight\u003c\/th\u003e\n\u003ctd\u003e2400 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCrated weight\u003c\/th\u003e\n\u003ctd\u003e3400 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFoot pedal\u003c\/li\u003e\n\u003cli\u003eTunnel conveyor belt alternatives: metal mesh, Teflon mesh or heat-resistant plastic modular belt\u003c\/li\u003e\n\u003cli\u003eStainless steel version for wet or damp environments\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960172564818,"sku":"MPK-TMC-PRO-8065-M","price":22995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/TMC8065-M_01.png?v=1791317503"},{"product_id":"maripak-rls-e-pro-5844-automatic-l-bar-sealer","title":"Maripak RLS e-Pro 5844 Automatic L-Bar Sealer, 23\" × 17\"","description":"\u003cp\u003eThe Maripak RLS e-Pro 5844 is a fully automatic L-bar sealer with servo drives for continuous shrink packaging. Products arrive on the infeed conveyor, a sensor detects their length, and the machine wraps, seals and trims each pack without an operator closing the bar.\u003c\/p\u003e\n\u003cp\u003eThe conveyor runs at up to about 98 ft\/min (adjustable, per Maripak). The seal area is 23″ × 17″, and the maximum package size is about 14″ × 18″ × 6″, depending on the product. Standard products run without compressed air. For shrinking, it is combined with a heat shrink tunnel.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 20 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for standard products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFully automatic operation with servo drives\u003c\/li\u003e\n\u003cli\u003eProduct length detection by sensor, synchronized with encoder control\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder, both with tension control\u003c\/li\u003e\n\u003cli\u003eCenter-seal system for a seal line at different product heights\u003c\/li\u003e\n\u003cli\u003eServo-controlled L-bar opening and sealing pressure; color touchscreen and production counter\u003c\/li\u003e\n\u003cli\u003eTrimmer with sliding safety window and safety sensors; standard products run without compressed air\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturers moving from semi-automatic to fully automatic shrink packaging\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods lines with continuous product flow\u003c\/li\u003e\n\u003cli\u003eContract packers with changing product lengths, which the sensor detects automatically\u003c\/li\u003e\n\u003cli\u003eLines with infeed and discharge conveyors\u003c\/li\u003e\n\u003cli\u003eProducers who want one operator to feed the line instead of closing the bar for each pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. package size\u003c\/th\u003e\n\u003ctd\u003e14\" × 18\" × 6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSealer opening\u003c\/th\u003e\n\u003ctd\u003e6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product height\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min (adjustable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e23\" × 17\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. package width\u003c\/th\u003e\n\u003ctd\u003e14\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. package width\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e26\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness (min. \/ max.)\u003c\/th\u003e\n\u003ctd\u003e60–125 gauge \/ 15–33 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PE, OPP, CPP, PP, Knife Changes possible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e12\" standard (adjustable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for standard products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 20 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e4 kW \/ 3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e58 × 82 × 74\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e64 × 88 × 65\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e1649 lbs \/ 1825 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCrated weight\u003c\/th\u003e\n\u003ctd\u003e2600 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote access for troubleshooting (SMART KonecT)\u003c\/li\u003e\n\u003cli\u003eAdditional photo-eye for vertical or horizontal product detection\u003c\/li\u003e\n\u003cli\u003eSpeed control for SMART Sync infeed and discharge conveyors\u003c\/li\u003e\n\u003cli\u003eSpecial linking conveyor for small products\u003c\/li\u003e\n\u003cli\u003eSiemens control system\u003c\/li\u003e\n\u003cli\u003eAutomatic lubrication system\u003c\/li\u003e\n\u003cli\u003ePrinted film with registration mark detection\u003c\/li\u003e\n\u003cli\u003eSingle-layer flat film with center-folding\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960173220178,"sku":"MPK-RLS-EPRO-5844","price":37845.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/RLS-ePRO-5844_01.jpg?v=1791317209"},{"product_id":"maripak-rls-e-pro-8065-automatic-l-bar-sealer","title":"Maripak RLS e-Pro 8065 Automatic L-Bar Sealer, 32\" × 24\"","description":"\u003cp\u003eThe Maripak RLS e-Pro 8065 is a fully automatic L-bar sealer with servo drives for larger packages. A sensor detects the product length, and the machine wraps, seals and trims each pack automatically while the conveyor runs at up to about 98 ft\/min (adjustable, per Maripak).\u003c\/p\u003e\n\u003cp\u003eThe seal area is 32″ × 24″, and the maximum package size is about 20″ × 28″ × 6″, depending on the product. Standard products run without compressed air. For shrinking, it is combined with a heat shrink tunnel.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 30 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for standard products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFully automatic operation with servo drives for packs up to 20″ wide\u003c\/li\u003e\n\u003cli\u003eProduct length detection by sensor, synchronized with encoder control\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder with tension control; film up to 36″ wide\u003c\/li\u003e\n\u003cli\u003eCenter-seal system for different product heights\u003c\/li\u003e\n\u003cli\u003eServo-controlled L-bar opening and sealing pressure; color touchscreen and production counter\u003c\/li\u003e\n\u003cli\u003eSafety window and sensors; standard products run without compressed air\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomatic lines for larger boxes, trays and multipacks up to about 20″ × 28″ × 6″\u003c\/li\u003e\n\u003cli\u003eFood and beverage producers with wide packs running in continuous shifts\u003c\/li\u003e\n\u003cli\u003eConsumer goods manufacturers with continuous production and changing pack sizes\u003c\/li\u003e\n\u003cli\u003eContract packers that need a wide seal area and automatic length detection\u003c\/li\u003e\n\u003cli\u003eLines with conveyor infeed and a matching shrink tunnel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. package size\u003c\/th\u003e\n\u003ctd\u003e20\" × 28\" × 6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSealer opening\u003c\/th\u003e\n\u003ctd\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product height\u003c\/th\u003e\n\u003ctd\u003e6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min (adjustable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e32\" × 24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. package width\u003c\/th\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. package width\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness (min. \/ max.)\u003c\/th\u003e\n\u003ctd\u003e40–150 gauge \/ 10–40 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PE, OPP, CPP, PP, Knife Changes possible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e12\" standard (adjustable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for standard products\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 30 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e5 kW \/ 3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e76\" × 113\" × 78\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e78\" × 124\" × 72\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2400 lbs \/ 3400 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCrated weight\u003c\/th\u003e\n\u003ctd\u003e3400 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote access for troubleshooting (SMART KonecT)\u003c\/li\u003e\n\u003cli\u003eAdditional photo-eye for vertical or horizontal product detection\u003c\/li\u003e\n\u003cli\u003eSpeed control for SMART Sync infeed and discharge conveyors\u003c\/li\u003e\n\u003cli\u003eSpecial linking conveyor for small products\u003c\/li\u003e\n\u003cli\u003eSiemens control system\u003c\/li\u003e\n\u003cli\u003eAutomatic lubrication system\u003c\/li\u003e\n\u003cli\u003ePrinted film with registration mark detection\u003c\/li\u003e\n\u003cli\u003eSingle-layer flat film with center-folding\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960173318482,"sku":"MPK-RLS-EPRO-8065","price":66995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/RLS-ePRO-8065_01.jpg?v=1791317223"},{"product_id":"maripak-cls-compact-automatic-l-sealer-shrink-tunnel-combo","title":"Maripak CLS Compact Automatic L-Sealer and Shrink Tunnel Combination","description":"\u003cp\u003eThe Maripak CLS Compact is a fully automatic L-sealer and heat shrink tunnel in one compact machine, built for continuous operation. Products are wrapped, sealed and shrunk in one pass, without separate machines to line up.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, the conveyor runs at up to about 66 ft\/min (adjustable). The L-sealer size is 17″ × 18″ for products up to 4.5″ high. The machine requires compressed air (6 bar) and 220 V single-phase, 75 A, or 220 V three-phase, 45 A, made to order.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 75 A (220V three-phase, 45 A, available made to order). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomatic L-sealer and shrink tunnel in one machine\u003c\/li\u003e\n\u003cli\u003eProduct length detection by sensor, synchronized with encoder control\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder with tension control\u003c\/li\u003e\n\u003cli\u003eRemote access (SMART KonecT) included per Maripak\u003c\/li\u003e\n\u003cli\u003eTunnel with adjustable conveyor speed, digital PID temperature control and airflow flaps\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 158 °F; production counter; compressed air required (6 bar)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProducers of small to medium packs who need fully automatic output in a single machine\u003c\/li\u003e\n\u003cli\u003eFood, cosmetics and pharmaceutical retail packs up to 4.5″ high, such as cartons and trays\u003c\/li\u003e\n\u003cli\u003eFacilities with limited space for a separate sealer, tunnel and linking conveyor\u003c\/li\u003e\n\u003cli\u003eContract packers running continuous shifts, with remote access for troubleshooting\u003c\/li\u003e\n\u003cli\u003eLines that already have compressed air available at the packing area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSealer opening\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product height\u003c\/th\u003e\n\u003ctd\u003e4.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e66 ft\/min (adjustable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e17\" × 18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e13\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. package width\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness (min. \/ max.)\u003c\/th\u003e\n\u003ctd\u003e60–160 gauge \/ 15–40 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 75 A (220V three-phase, 45 A, available made to order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e16 kW \/ 10 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e63 × 128 × 73\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e70 × 134 × 76\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2200 lbs \/ 2205 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCrated weight\u003c\/th\u003e\n\u003ctd\u003e3150 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecial linking conveyor for small products\u003c\/li\u003e\n\u003cli\u003eSpeed control for SMART Sync infeed and discharge conveyors\u003c\/li\u003e\n\u003cli\u003eAdditional photo-eye for vertical or horizontal product detection\u003c\/li\u003e\n\u003cli\u003eAutomatic lubrication system\u003c\/li\u003e\n\u003cli\u003eCenter-seal system for different product heights\u003c\/li\u003e\n\u003cli\u003eHeat-resistant plastic modular tunnel conveyor\u003c\/li\u003e\n\u003cli\u003eSiemens control system\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960173384018,"sku":"MPK-CLS-COMPACT-4245","price":47750.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/CLS-Compact-4245_01.jpg?v=1791316900"},{"product_id":"maripak-lmc-p-14065p-pneumatic-l-bar-sealer-long-products","title":"Maripak LMC-P 14065P Pneumatic L-Bar Sealer for Long Products, 55\" × 26\"","description":"\u003cp\u003eThe Maripak LMC-P 14065P is a heavy-duty semi-automatic L-bar sealer for long and oversized products. Its 55″ × 26″ seal area covers items that do not fit a standard L-sealer, such as long profiles, panels and tubes.\u003c\/p\u003e\n\u003cp\u003eThe sealing bar is closed pneumatically, so the machine requires compressed air (4–6 bar). An internal belt conveyor discharges the finished pack automatically, and the LMC-P can be connected directly to a heat shrink tunnel. Per Maripak, it wraps about 4–6 packs per minute.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 24 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (4–6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge 55″ × 26″ seal area for long and oversized products\u003c\/li\u003e\n\u003cli\u003eDouble pneumatic cylinder gives even sealing pressure along the whole L-bar\u003c\/li\u003e\n\u003cli\u003eTwo-hand start buttons for operator safety\u003c\/li\u003e\n\u003cli\u003eInternal belt conveyor discharges the pack automatically\u003c\/li\u003e\n\u003cli\u003eWorking table adjustable to the product width; quick-change film roll holder\u003c\/li\u003e\n\u003cli\u003eConnects directly to a heat shrink tunnel; 220 V three-phase, 24 A; compressed air 4–6 bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilding products: profiles, trim, panels and tubes that need a seal area of up to 55″\u003c\/li\u003e\n\u003cli\u003eFurniture and home goods with long parts such as rails, legs and shelves\u003c\/li\u003e\n\u003cli\u003eSporting goods such as poles, frames and long accessories\u003c\/li\u003e\n\u003cli\u003eManufacturers of long kits and assemblies\u003c\/li\u003e\n\u003cli\u003eLines that already have compressed air and a shrink tunnel, or plan one for long packs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e4–6 packs\/min (per Maripak; depends on package size and film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product height\u003c\/th\u003e\n\u003ctd\u003e10\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF: 7-37 micron \/PVC: 15-25 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003ePneumatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e55\" × 26\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e28\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (4–6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 24 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e2.2 kW \/ 0.7 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e49 × 123 × 65\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e57 × 131 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2028 lbs \/ 2293 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomatic trim winder\u003c\/li\u003e\n\u003cli\u003eFoot pedal\u003c\/li\u003e\n\u003cli\u003eTaller chamber for products up to 13.5\" high\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eStainless steel version for wet or damp environments\u003c\/li\u003e\n\u003cli\u003eSolid L-knife instead of sealing wire for thicker film\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960173449554,"sku":"MPK-LMC-P-14065P","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/LMCP14065_01.jpg?v=1791317105"},{"product_id":"maripak-impack-pro-20-automatic-side-sealer","title":"Maripak IMPACK PRO 20 Automatic Side Sealer","description":"\u003cp\u003eThe Maripak IMPACK PRO 20 is a fully automatic intermittent-motion side sealer with servo drives, and the smallest model of the IMPACK PRO series. A side sealer seals the film along the length of the product, so it wraps long products as easily as short ones.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, it reaches up to 60 cycles per minute with a letter-size (DIN A4) package. The cross seal is 12″ long and the film can be up to 26″ wide. The standard unit runs without compressed air on 220 V single-phase, 35 A, or three-phase, 20 A.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 35 A, or 220V three-phase, 20 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFully automatic intermittent-motion side sealing with servo drives\u003c\/li\u003e\n\u003cli\u003eCross seal length 12″ and film up to 26″ wide\u003c\/li\u003e\n\u003cli\u003eAutomatic product length detection by sensor; feeding frequency controlled by sensor and PLC\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder, both with tension control\u003c\/li\u003e\n\u003cli\u003eColor touchscreen operator panel; up to 98 ft\/min conveyor speed, adjustable\u003c\/li\u003e\n\u003cli\u003eStandard unit runs without compressed air; on wheels to move within your facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomatic shrink lines for small packs such as cartons, software boxes and food trays\u003c\/li\u003e\n\u003cli\u003eProducts of any length, such as profiles, boards and long boxes, because the side seal runs along the product\u003c\/li\u003e\n\u003cli\u003eContract packers with frequent product changes, since the sensor measures each product length automatically\u003c\/li\u003e\n\u003cli\u003eFood, printing and consumer goods producers with steady volumes of up to 60 cycles per minute\u003c\/li\u003e\n\u003cli\u003eLines that combine the sealer with a Maripak heat shrink tunnel and SMART Sync conveyors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e60 cycles\/min (example: DIN A4-size package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e12\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PP \"V\" Knife: 7-40 micron \/ PE,OPP \"W\" Knife: 40-80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e26\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 35 A, or 220V three-phase, 20 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e6 kW \/ 3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e49 × 91 × 63\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e1376 lbs \/ 1521 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote access for troubleshooting (SMART KonecT)\u003c\/li\u003e\n\u003cli\u003eUpgraded sealing system for thicker film\u003c\/li\u003e\n\u003cli\u003ePhoto-eye for clear or translucent products\u003c\/li\u003e\n\u003cli\u003eClosing \/ linking belt (requires compressed air)\u003c\/li\u003e\n\u003cli\u003eAutomatic lubrication system\u003c\/li\u003e\n\u003cli\u003eSiemens control system\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960173744466,"sku":"MPK-IMPACK-PRO-20","price":63980.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/IMPPRO20_01.jpg?v=1791317027"},{"product_id":"maripak-impack-pro-40-automatic-side-sealer","title":"Maripak IMPACK PRO 40 Automatic Side Sealer","description":"\u003cp\u003eThe Maripak IMPACK PRO 40 is a fully automatic intermittent-motion side sealer with servo drives for medium-size packs. The side seal runs along the length of the product, so long and short products run on the same machine without changing the seal bar.\u003c\/p\u003e\n\u003cp\u003eIt has a 21″ cross seal and a 16″ wide conveyor belt and takes film up to 26″ wide. Per Maripak, it reaches up to 60 cycles per minute with a letter-size (DIN A4) package. The standard unit runs without compressed air on 220 V single-phase, 35 A, or three-phase, 20 A.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 35 A, or 220V three-phase, 20 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFully automatic intermittent-motion side sealing with servo drives\u003c\/li\u003e\n\u003cli\u003eCross seal length 21″, 16″ conveyor belt and film up to 26″ wide\u003c\/li\u003e\n\u003cli\u003eAutomatic product length detection by sensor; feeding frequency controlled by sensor and PLC\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder, both with tension control\u003c\/li\u003e\n\u003cli\u003eColor touchscreen operator panel; up to 98 ft\/min conveyor speed, adjustable\u003c\/li\u003e\n\u003cli\u003eStandard unit runs without compressed air; on wheels to move within your facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomatic shrink lines for medium packs up to the 16″ belt width\u003c\/li\u003e\n\u003cli\u003eProducts of any length, such as profiles, boards and long boxes, because the side seal runs along the product\u003c\/li\u003e\n\u003cli\u003eContract packers with frequent product changes, since the sensor measures each product length automatically\u003c\/li\u003e\n\u003cli\u003eFood, printing and consumer goods producers with steady volumes of up to 60 cycles per minute\u003c\/li\u003e\n\u003cli\u003eLines that combine the sealer with a Maripak heat shrink tunnel and SMART Sync conveyors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e60 cycles\/min (example: DIN A4-size package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e12\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PP \"V\" Knife: 7-40 micron \/ PE,OPP \"W\" Knife: 40-80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e21\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e26\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 35 A, or 220V three-phase, 20 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e6 kW \/ 3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e50 × 83 × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e58 × 91 × 63\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e1720 lbs \/ 1896 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote access for troubleshooting (SMART KonecT)\u003c\/li\u003e\n\u003cli\u003eUpgraded sealing system for thicker film\u003c\/li\u003e\n\u003cli\u003ePhoto-eye for clear or translucent products\u003c\/li\u003e\n\u003cli\u003eClosing \/ linking belt (requires compressed air)\u003c\/li\u003e\n\u003cli\u003eAutomatic lubrication system\u003c\/li\u003e\n\u003cli\u003eSiemens control system\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960173875538,"sku":"MPK-IMPACK-PRO-40","price":66980.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/IMPPRO40_01.jpg?v=1791317037"},{"product_id":"maripak-impack-pro-60-automatic-side-sealer","title":"Maripak IMPACK PRO 60 Automatic Side Sealer","description":"\u003cp\u003eThe Maripak IMPACK PRO 60 is a fully automatic intermittent-motion side sealer with servo drives for wider packs. The side seal runs along the product, so the machine wraps long items as well as short ones without a fixed seal length.\u003c\/p\u003e\n\u003cp\u003eIt has a 31″ cross seal and a 24″ wide conveyor belt and takes film up to 36″ wide. Per Maripak, it reaches up to 60 cycles per minute with a letter-size (DIN A4) package. The standard unit runs without compressed air on 220 V single-phase, 35 A, or three-phase, 20 A.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 35 A, or 220V three-phase, 20 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFully automatic intermittent-motion side sealing with servo drives\u003c\/li\u003e\n\u003cli\u003eCross seal length 31″, 24″ conveyor belt and film up to 36″ wide\u003c\/li\u003e\n\u003cli\u003eAutomatic product length detection by sensor; feeding frequency controlled by sensor and PLC\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder, both with tension control\u003c\/li\u003e\n\u003cli\u003eColor touchscreen operator panel; up to 98 ft\/min conveyor speed, adjustable\u003c\/li\u003e\n\u003cli\u003eStandard unit runs without compressed air; on wheels to move within your facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomatic shrink lines for wide packs, trays and multipacks up to the 24″ belt\u003c\/li\u003e\n\u003cli\u003eProducts of any length, such as profiles, boards and long boxes, because the side seal runs along the product\u003c\/li\u003e\n\u003cli\u003eContract packers with frequent product changes, since the sensor measures each product length automatically\u003c\/li\u003e\n\u003cli\u003eFood, printing and consumer goods producers with steady volumes of up to 60 cycles per minute\u003c\/li\u003e\n\u003cli\u003eLines that combine the sealer with a Maripak heat shrink tunnel and SMART Sync conveyors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e60 cycles\/min (example: DIN A4-size package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e12\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PP \"V\" Knife: 7-40 micron \/ PE,OPP \"W\" Knife: 40-80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e31\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 35 A, or 220V three-phase, 20 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e6 kW \/ 3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e65 × 95 × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e73 × 102 × 63\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2315 lbs \/ 2580 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote access for troubleshooting (SMART KonecT)\u003c\/li\u003e\n\u003cli\u003eUpgraded sealing system for thicker film\u003c\/li\u003e\n\u003cli\u003ePhoto-eye for clear or translucent products\u003c\/li\u003e\n\u003cli\u003eClosing \/ linking belt (requires compressed air)\u003c\/li\u003e\n\u003cli\u003eAutomatic lubrication system\u003c\/li\u003e\n\u003cli\u003eSiemens control system\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960173941074,"sku":"MPK-IMPACK-PRO-60","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/IMPPRO60_01.jpg?v=1791317048"},{"product_id":"maripak-impack-pro-80-automatic-side-sealer","title":"Maripak IMPACK PRO 80 Automatic Side Sealer","description":"\u003cp\u003eThe Maripak IMPACK PRO 80 is a fully automatic intermittent-motion side sealer with servo drives for large packs. With the side seal running along the product, it wraps long and wide items such as panels and large boxes.\u003c\/p\u003e\n\u003cp\u003eIt has a 36″ cross seal and a 31″ wide conveyor belt and takes film up to 39″ wide. Per Maripak, it reaches up to 60 cycles per minute with a letter-size (DIN A4) package. The standard unit runs without compressed air on 220 V single-phase, 35 A, or three-phase, 20 A.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 35 A, or 220V three-phase, 20 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFully automatic intermittent-motion side sealing with servo drives\u003c\/li\u003e\n\u003cli\u003eCross seal length 36″, 31″ conveyor belt and film up to 39″ wide\u003c\/li\u003e\n\u003cli\u003eAutomatic product length detection by sensor; feeding frequency controlled by sensor and PLC\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder, both with tension control\u003c\/li\u003e\n\u003cli\u003eColor touchscreen operator panel; up to 98 ft\/min conveyor speed, adjustable\u003c\/li\u003e\n\u003cli\u003eStandard unit runs without compressed air; on wheels to move within your facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomatic shrink lines for large packs such as panels, large boxes and bundles\u003c\/li\u003e\n\u003cli\u003eProducts of any length, such as profiles, boards and long boxes, because the side seal runs along the product\u003c\/li\u003e\n\u003cli\u003eContract packers with frequent product changes, since the sensor measures each product length automatically\u003c\/li\u003e\n\u003cli\u003eFood, printing and consumer goods producers with steady volumes of up to 60 cycles per minute\u003c\/li\u003e\n\u003cli\u003eLines that combine the sealer with a Maripak heat shrink tunnel and SMART Sync conveyors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e60 cycles\/min (example: DIN A4-size package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e12\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PP \"V\" Knife: 7-40 micron \/ PE,OPP \"W\" Knife: 40-80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e31\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 35 A, or 220V three-phase, 20 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e7 kW \/ 4 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e71 × 106 × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e79 × 114 × 63\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e3109 lbs \/ 3417 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote access for troubleshooting (SMART KonecT)\u003c\/li\u003e\n\u003cli\u003eUpgraded sealing system for thicker film\u003c\/li\u003e\n\u003cli\u003ePhoto-eye for clear or translucent products\u003c\/li\u003e\n\u003cli\u003eClosing \/ linking belt (requires compressed air)\u003c\/li\u003e\n\u003cli\u003eAutomatic lubrication system\u003c\/li\u003e\n\u003cli\u003eSiemens control system\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960181772626,"sku":"MPK-IMPACK-PRO-80","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/IMPPRO80_01.jpg?v=1791317058"},{"product_id":"maripak-impack-pro-100-automatic-side-sealer","title":"Maripak IMPACK PRO 100 Automatic Side Sealer","description":"\u003cp\u003eThe Maripak IMPACK PRO 100 is the largest fully automatic intermittent-motion side sealer in the IMPACK PRO series. It wraps very wide and long products, because the side seal runs along the product and the cross seal is 45″ long.\u003c\/p\u003e\n\u003cp\u003eIt has a 39″ wide conveyor belt and takes film up to 49″ wide. Per Maripak, it reaches up to 60 cycles per minute with a letter-size (DIN A4) package, and remote access (SMART KonecT) is included. The standard unit runs without compressed air on 480 V three-phase, 20 A.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 20 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFully automatic intermittent-motion side sealing with servo drives\u003c\/li\u003e\n\u003cli\u003eCross seal length 45″, 39″ conveyor belt and film up to 49″ wide\u003c\/li\u003e\n\u003cli\u003eAutomatic product length detection by sensor; feeding frequency controlled by sensor and PLC\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder, both with tension control\u003c\/li\u003e\n\u003cli\u003eColor touchscreen operator panel; up to 98 ft\/min conveyor speed, adjustable\u003c\/li\u003e\n\u003cli\u003eStandard unit runs without compressed air; on wheels to move within your facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomatic shrink lines for very wide packs such as furniture panels, doors and large kits\u003c\/li\u003e\n\u003cli\u003eProducts of any length, such as profiles, boards and long boxes, because the side seal runs along the product\u003c\/li\u003e\n\u003cli\u003eContract packers with frequent product changes, since the sensor measures each product length automatically\u003c\/li\u003e\n\u003cli\u003eFood, printing and consumer goods producers with steady volumes of up to 60 cycles per minute\u003c\/li\u003e\n\u003cli\u003eLines that combine the sealer with a Maripak heat shrink tunnel and SMART Sync conveyors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e60 cycles\/min (example: DIN A4-size package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e12\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PP \"V\" Knife: 7-40 micron \/ PE,OPP \"W\" Knife: 40-80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e45\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e49\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 20 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e7 kW \/ 4 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e83 × 118 × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e4321 lbs \/ 4806 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote access for troubleshooting (SMART KonecT) included per Maripak\u003c\/li\u003e\n\u003cli\u003eUpgraded sealing system for thicker film\u003c\/li\u003e\n\u003cli\u003ePhoto-eye for clear or translucent products\u003c\/li\u003e\n\u003cli\u003eClosing \/ linking belt (requires compressed air)\u003c\/li\u003e\n\u003cli\u003eAutomatic lubrication system\u003c\/li\u003e\n\u003cli\u003eSiemens control system\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960181903698,"sku":"MPK-IMPACK-PRO-100","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/IMPPRO100_01.jpg?v=1791317017"},{"product_id":"maripak-impack-hybrid-60-automatic-side-sealer","title":"Maripak IMPACK HYBRID 60 Automatic Side Sealer for Tall Products","description":"\u003cp\u003eThe Maripak IMPACK HYBRID 60 is a fully automatic side sealer for taller products. Its 16″ seal bar opening leaves much more pass-through height than a standard side sealer with a 10″ opening.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, it wraps up to 40 packs per minute with a letter-size (DIN A4) package. The side seal is actuated by a solenoid, so the standard unit needs no compressed air. The conveyor belt is 24″ wide, the cross seal 31.25″ long, and the film up to 36″ wide.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 24 A, or 220V three-phase, 12 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e16″ seal bar opening for tall products such as bottles, tall cartons and stacked packs\u003c\/li\u003e\n\u003cli\u003eSolenoid-actuated side seal: the standard unit needs no compressed air\u003c\/li\u003e\n\u003cli\u003eServo drives with automatic product length detection; feeding controlled by sensor and PLC\u003c\/li\u003e\n\u003cli\u003e31.25″ cross seal, 24″ conveyor belt and film up to 36″ wide\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder with tension control; color touchscreen\u003c\/li\u003e\n\u003cli\u003eMinimum package width 13.8″, or 5.9″ as an option; 220 V single-phase, 24 A, or three-phase, 12 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBeverage and household goods producers with tall packs\u003c\/li\u003e\n\u003cli\u003eMultipacks of bottles, jars and cans that do not fit a 10″ opening\u003c\/li\u003e\n\u003cli\u003eStacked products such as trays and cartons wrapped as one unit\u003c\/li\u003e\n\u003cli\u003eAutomatic lines that need tall product clearance without compressed air\u003c\/li\u003e\n\u003cli\u003eProducers combining the sealer with a heat shrink tunnel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e40 packs\/min (example: DIN A4-size package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e11\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PP \"V\" Knife: 7-40 micron \/ PE,OPP \"W\" Knife: 40-80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. package width\u003c\/th\u003e\n\u003ctd\u003e13.8\" (5.9\" as an option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e31.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 24 A, or 220V three-phase, 12 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e7 kW \/ 5 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e73 × 130 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e81 × 138 × 73\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2756 lbs \/ 3086 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNarrower minimum package width (5.9\" instead of 13.8\")\u003c\/li\u003e\n\u003cli\u003eRaised working height\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960183181650,"sku":"MPK-IMPACK-HYBRID-60","price":80000.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/IMPHY60_01.jpg?v=1791316947"},{"product_id":"maripak-impack-pro-motion-20-continuous-motion-side-sealer","title":"Maripak IMPACK PRO-MOTION 20 Continuous Motion Side Sealer","description":"\u003cp\u003eThe Maripak IMPACK PRO-MOTION 20 is a fully automatic continuous-motion side sealer for high-speed lines with small packs. Unlike an intermittent sealer, the product keeps moving while it is sealed, which allows much higher speeds.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, it reaches about 98 ft\/min and up to 110 cycles per minute, depending on package size and film. It has a 16″ cross seal, an 8″ wide conveyor belt and takes film up to 28″ wide. The standard unit runs without compressed air on 220 V three-phase, 25 A.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 25 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eContinuous-motion side sealing: the product never stops, for up to 110 cycles per minute per Maripak\u003c\/li\u003e\n\u003cli\u003eCross seal length 16″ and 8″ conveyor belt\u003c\/li\u003e\n\u003cli\u003eEncoder-controlled speed, automatic package length detection and photocell-controlled product spacing\u003c\/li\u003e\n\u003cli\u003eCross-seal and continuous side-seal knives with PID-controlled heaters; motorized film unwind with tension control\u003c\/li\u003e\n\u003cli\u003eColor touchscreen plus hard buttons for the most-used functions; format changes programmed on the panel\u003c\/li\u003e\n\u003cli\u003eStandard unit runs without compressed air; 220 V three-phase, 25 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-speed lines for small packs such as cards, small cartons and portion packs\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers that need more than 60 cycles per minute\u003c\/li\u003e\n\u003cli\u003ePrinting and publishing lines wrapping magazines, books and catalogs continuously\u003c\/li\u003e\n\u003cli\u003eProducers with fixed products and long runs, where continuous motion pays off\u003c\/li\u003e\n\u003cli\u003eLines that combine the sealer with a matching heat shrink tunnel and conveyors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e110 cycle \/ packs\/min (example: DIN A4-size package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e11\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\", Opional:\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PP \"V\" Knife: 7-40 micron \/ PE,OPP \"W\" Knife: 40-80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e28\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 25 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e7 kW \/ 6 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e53 × 128 × 58\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e59 × 136 × 65\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e1543 lbs \/ 1742 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960183279954,"sku":"MPK-IMPACK-PM-20","price":83990.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/IMPPMO20_01.jpg?v=1791316961"},{"product_id":"maripak-impack-pro-motion-40-continuous-motion-side-sealer","title":"Maripak IMPACK PRO-MOTION 40 Continuous Motion Side Sealer","description":"\u003cp\u003eThe Maripak IMPACK PRO-MOTION 40 is a fully automatic continuous-motion side sealer for high-speed lines with medium-size packs. The product keeps moving through the sealer, so the line does not stop for each cross seal.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, it reaches about 98 ft\/min and up to 110 cycles per minute, depending on package size and film. It has a 21″ cross seal and a 16″ wide conveyor belt. The standard unit runs without compressed air on 220 V three-phase, 25 A.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 25 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eContinuous-motion side sealing: the product never stops, for up to 110 cycles per minute per Maripak\u003c\/li\u003e\n\u003cli\u003eCross seal length 21″ and 16″ conveyor belt\u003c\/li\u003e\n\u003cli\u003eEncoder-controlled speed, automatic package length detection and photocell-controlled product spacing\u003c\/li\u003e\n\u003cli\u003eCross-seal and continuous side-seal knives with PID-controlled heaters; motorized film unwind with tension control\u003c\/li\u003e\n\u003cli\u003eColor touchscreen plus hard buttons for the most-used functions; format changes programmed on the panel\u003c\/li\u003e\n\u003cli\u003eStandard unit runs without compressed air; 220 V three-phase, 25 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-speed lines for medium packs up to the 16″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers that need more than 60 cycles per minute\u003c\/li\u003e\n\u003cli\u003ePrinting and publishing lines wrapping magazines, books and catalogs continuously\u003c\/li\u003e\n\u003cli\u003eProducers with fixed products and long runs, where continuous motion pays off\u003c\/li\u003e\n\u003cli\u003eLines that combine the sealer with a matching heat shrink tunnel and conveyors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e110 cycle \/ packs\/min (example: DIN A4-size package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e11\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\", Opional:\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PP \"V\" Knife: 7-40 micron \/ PE,OPP \"W\" Knife: 40-80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e21\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 25 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e7 kW \/ 6 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e59 × 128 × 58\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e67 × 136 × 65\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2161 lbs \/ 2227 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960183378258,"sku":"MPK-IMPACK-PM-40","price":89990.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/IMPPMO40_01.jpg?v=1791316976"},{"product_id":"maripak-impack-pro-motion-60-continuous-motion-side-sealer","title":"Maripak IMPACK PRO-MOTION 60 Continuous Motion Side Sealer","description":"\u003cp\u003eThe Maripak IMPACK PRO-MOTION 60 is a fully automatic continuous-motion side sealer for high-speed lines with wider packs. The product keeps moving while the cross and side seals are made, which allows speeds an intermittent machine cannot reach.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, it reaches about 98 ft\/min and up to 110 cycles per minute, depending on package size and film. It has a 29″ cross seal, a 24″ wide conveyor belt and takes film up to 39″ wide. The standard unit runs without compressed air on 220 V three-phase, 25 A.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 25 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eContinuous-motion side sealing: the product never stops, for up to 110 cycles per minute per Maripak\u003c\/li\u003e\n\u003cli\u003eCross seal length 29″ and 24″ conveyor belt\u003c\/li\u003e\n\u003cli\u003eEncoder-controlled speed, automatic package length detection and photocell-controlled product spacing\u003c\/li\u003e\n\u003cli\u003eCross-seal and continuous side-seal knives with PID-controlled heaters; motorized film unwind with tension control\u003c\/li\u003e\n\u003cli\u003eColor touchscreen plus hard buttons for the most-used functions; format changes programmed on the panel\u003c\/li\u003e\n\u003cli\u003eStandard unit runs without compressed air; 220 V three-phase, 25 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-speed lines for wide packs, trays and multipacks up to the 24″ belt\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers that need more than 60 cycles per minute\u003c\/li\u003e\n\u003cli\u003ePrinting and publishing lines wrapping magazines, books and catalogs continuously\u003c\/li\u003e\n\u003cli\u003eProducers with fixed products and long runs, where continuous motion pays off\u003c\/li\u003e\n\u003cli\u003eLines that combine the sealer with a matching heat shrink tunnel and conveyors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e110 cycle \/ packs\/min (example: DIN A4-size package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e11\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\", Opional:\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PP \"V\" Knife: 7-40 micron \/ PE,OPP \"W\" Knife: 40-80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e29\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 25 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e7 kW \/ 6 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e71 × 148 × 63\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e79 × 156 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2403 lbs \/ 2756 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960183443794,"sku":"MPK-IMPACK-PM-60","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/IMPPMO60_01.jpg?v=1791316991"},{"product_id":"maripak-impack-pro-motion-80-continuous-motion-side-sealer","title":"Maripak IMPACK PRO-MOTION 80 Continuous Motion Side Sealer","description":"\u003cp\u003eThe Maripak IMPACK PRO-MOTION 80 is the largest continuous-motion side sealer in the series, for high-speed lines with large packs. The product moves through without stopping, while the cross seal and the continuous side seal close the film.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, it reaches about 98 ft\/min and up to 110 cycles per minute, depending on package size and film. It has a 37″ cross seal, a 31″ wide conveyor belt and takes film up to 39″ wide. The standard unit runs without compressed air on 220 V three-phase, 35 A.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 35 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eContinuous-motion side sealing: the product never stops, for up to 110 cycles per minute per Maripak\u003c\/li\u003e\n\u003cli\u003eCross seal length 37″ and 31″ conveyor belt\u003c\/li\u003e\n\u003cli\u003eEncoder-controlled speed, automatic package length detection and photocell-controlled product spacing\u003c\/li\u003e\n\u003cli\u003eCross-seal and continuous side-seal knives with PID-controlled heaters; motorized film unwind with tension control\u003c\/li\u003e\n\u003cli\u003eColor touchscreen plus hard buttons for the most-used functions; format changes programmed on the panel\u003c\/li\u003e\n\u003cli\u003eStandard unit runs without compressed air; 220 V three-phase, 35 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-speed lines for large packs such as bundles, large cartons and panels\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers that need more than 60 cycles per minute\u003c\/li\u003e\n\u003cli\u003ePrinting and publishing lines wrapping magazines, books and catalogs continuously\u003c\/li\u003e\n\u003cli\u003eProducers with fixed products and long runs, where continuous motion pays off\u003c\/li\u003e\n\u003cli\u003eLines that combine the sealer with a matching heat shrink tunnel and conveyors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e110 cycle \/ packs\/min (example: DIN A4-size package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e11\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\", Opional:\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PP \"V\" Knife: 7-40 micron \/ PE,OPP \"W\" Knife: 40-80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e37\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e31\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 35 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e8 kW \/ 7 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e79 × 148 × 63\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e87 × 156 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2513 lbs \/ 2910 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote access for troubleshooting (SMART KonecT)\u003c\/li\u003e\n\u003cli\u003eUpgraded sealing system for thicker film\u003c\/li\u003e\n\u003cli\u003ePhoto-eye for clear or translucent products\u003c\/li\u003e\n\u003cli\u003eAutomatic lubrication system\u003c\/li\u003e\n\u003cli\u003eMotorized adjustment package\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960183574866,"sku":"MPK-IMPACK-PM-80","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/IMPPMO80_01.jpg?v=1791317006"},{"product_id":"maripak-sympack-35-side-sealer-shrink-tunnel-combo","title":"Maripak SYMPACK 35 Side Sealer and Shrink Tunnel Combination","description":"\u003cp\u003eThe Maripak SYMPACK 35 combines a fully automatic side sealer and a heat shrink tunnel in one machine, for lines with limited floor space. Products are wrapped, sealed and shrunk in one pass, without a separate tunnel to connect and align.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, the conveyor runs at up to about 98 ft\/min. The side seal is actuated by a solenoid, so the standard unit needs no compressed air. The maximum package size is about 13″ × 20″ × 7″ (W × L × H), and the machine runs on 220–240 V three-phase power.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220–240V three-phase. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSide sealer and heat shrink tunnel in one machine: one footprint and one power connection\u003c\/li\u003e\n\u003cli\u003eSolenoid-actuated side seal: no compressed air for the standard unit\u003c\/li\u003e\n\u003cli\u003eAutomatic product length detection by sensor, synchronized with encoder control\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder with tension control\u003c\/li\u003e\n\u003cli\u003eColor touchscreen; feeding frequency controlled by sensor and PLC\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 158 °F before switch-off; tunnel belt alternatives available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProducers that need automatic shrink packaging in a small footprint\u003c\/li\u003e\n\u003cli\u003eFood, cosmetics and household products up to 13″ × 20″ × 7″\u003c\/li\u003e\n\u003cli\u003ePrinting and stationery packs wrapped at line speed without a separate tunnel to set up\u003c\/li\u003e\n\u003cli\u003eFacilities without compressed air at the packing line\u003c\/li\u003e\n\u003cli\u003eBusinesses replacing a semi-automatic L-bar and separate tunnel with one automatic machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. package size\u003c\/th\u003e\n\u003ctd\u003e13\" w × 20\" l × 7\" h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e17\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e14\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. package width\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e22\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PE, PVC - 15-60 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e11\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220–240V three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e14 kW \/ 9 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTunnel conveyor belt alternatives: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eRaised working height\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960184688978,"sku":"MPK-SYMPACK-35","price":59995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/SYMP35_01.jpg?v=1791317297"},{"product_id":"maripak-wrapture-pro-motion-40-trimless-side-sealer","title":"Maripak WRAPTURE Pro-MOTION 40 Trimless Continuous Motion Side Sealer","description":"\u003cp\u003eThe Maripak WRAPTURE Pro-MOTION 40 is a continuous-motion trimless side sealer. The side seal is made without cutting off a film trim, so there is no trim scrap to wind up, and a pressurized top belt carries the package through the machine.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, the standard conveyor speed is up to 65 ft\/min, with an option for up to about 98 ft\/min. Packages can be up to 14″ wide and 6″ high, in any length. The machine requires compressed air (6 bar) and 400 V three-phase power.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e400V three-phase, 9 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrimless side seal: no film trim to collect or dispose of\u003c\/li\u003e\n\u003cli\u003ePackage transport by a pressurized top belt that holds the product in place\u003c\/li\u003e\n\u003cli\u003ePackages up to 14″ wide and 6″ high, in any length; film 10–80 micron single layer\u003c\/li\u003e\n\u003cli\u003eEncoder-controlled speed, automatic length detection and photocell-controlled spacing\u003c\/li\u003e\n\u003cli\u003eColor touchscreen plus hard buttons; format changes programmed on the panel\u003c\/li\u003e\n\u003cli\u003eOptions per Maripak: printed film with registration marks, automatic film splicing, electrostatic sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-volume lines that want to remove film trim handling\u003c\/li\u003e\n\u003cli\u003ePrinted film with registration marks for branded packs\u003c\/li\u003e\n\u003cli\u003eLong and flat products such as boards, frames and flat boxes\u003c\/li\u003e\n\u003cli\u003eFood and consumer goods lines with continuous product flow\u003c\/li\u003e\n\u003cli\u003eFacilities with compressed air and a 400 V three-phase supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. package size\u003c\/th\u003e\n\u003ctd\u003e14\" wide × 6\" high, any length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e9\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e65 ft\/min, option up to 98 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e21\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness (min. \/ max.)\u003c\/th\u003e\n\u003ctd\u003e10–80 micron, single layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PE, OPP, CPP, PP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e12\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e400V three-phase, 9 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e7 kW \/ 6 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e148 × 57 × 70\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e1720 lbs \/ 2006 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrinted film with registration mark detection\u003c\/li\u003e\n\u003cli\u003eAutomatic film splicing\u003c\/li\u003e\n\u003cli\u003eControl of external conveyors from the main panel\u003c\/li\u003e\n\u003cli\u003eElectrostatic sealing for a strong continuous seal\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960184721746,"sku":"MPK-WRAPTURE-PM-40","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/WPPMO40_01.jpg?v=1791317516"},{"product_id":"maripak-multimac-d-60-automatic-pe-shrink-bundler","title":"Maripak Multimac D 60 Automatic PE Shrink Bundler","description":"\u003cp\u003eThe Maripak Multimac D 60 is a fully automatic PE shrink bundler that wraps groups of bottles, cans or cartons in polyethylene shrink film. Infeed conveyor, sealer and shrink tunnel are built into one machine.\u003c\/p\u003e\n\u003cp\u003eIt has a 27″ cross seal and a 24″ conveyor belt and uses PE film of 1–3 mil (30–80 micron). Per Maripak, it runs at about 20 cycles per minute, or up to 35 in the servo version, depending on size and film. It requires compressed air (6 bar) and 220 V three-phase, 64 A (480 V made to order).\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 64 A (480V three-phase available made to order). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFully automatic bundling with motorized infeed and discharge conveyors and a built-in shrink tunnel\u003c\/li\u003e\n\u003cli\u003e27″ cross seal, 24″ conveyor belt and film up to 24″ wide\u003c\/li\u003e\n\u003cli\u003eEncoder-controlled speed, automatic length detection and sensor\/PLC-controlled feeding\u003c\/li\u003e\n\u003cli\u003eSealing blade guided on linear bearings; motorized PE film drive rollers\u003c\/li\u003e\n\u003cli\u003eTunnel with adjustable conveyor speed, digital PID temperature control and airflow flaps\u003c\/li\u003e\n\u003cli\u003eColor touchscreen with production counter; format changes programmed on the panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBeverage producers bundling bottles and cans into multipacks\u003c\/li\u003e\n\u003cli\u003eFood and canned goods producers grouping cans, jars and cartons\u003c\/li\u003e\n\u003cli\u003eHousehold and chemical products shipped in PE-wrapped bundles instead of corrugated cases\u003c\/li\u003e\n\u003cli\u003eProducers using printed PE film with registration marks (option)\u003c\/li\u003e\n\u003cli\u003eLines that need bundles up to the 24″ belt width at about 20–35 cycles per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e65 ft\/min (adjustable speed available as an option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e20 cycles\/min (35 cycles\/min in the servo version), per Maripak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e14\", adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e38\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePE (polyethylene)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness (min. \/ max.)\u003c\/th\u003e\n\u003ctd\u003e1–3 mil \/ 30–80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e27\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 64 A (480V three-phase available made to order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e22 kW \/ 13 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e47\" × 138\" × 89\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e1896 lbs \/ 2425 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLeft-to-right product flow (standard is right-to-left)\u003c\/li\u003e\n\u003cli\u003ePrinted film with registration mark detection\u003c\/li\u003e\n\u003cli\u003eFilm roll holders for top and bottom film at waist height\u003c\/li\u003e\n\u003cli\u003eSpare roll holder and manual film splicing\u003c\/li\u003e\n\u003cli\u003eServo version for higher speed\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960184820050,"sku":"MPK-MULTIMAC-D60","price":44650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/MMACD60_01.jpg?v=1791317178"},{"product_id":"maripak-multimac-d-80-automatic-pe-shrink-bundler","title":"Maripak Multimac D 80 Automatic PE Shrink Bundler","description":"\u003cp\u003eThe Maripak Multimac D 80 is a fully automatic PE shrink bundler that wraps groups of bottles, cans or cartons in polyethylene shrink film. Infeed conveyor, sealer and shrink tunnel are built into one machine.\u003c\/p\u003e\n\u003cp\u003eIt has a 33″ cross seal and a 31″ conveyor belt and uses PE film of 1–3 mil (30–80 micron). Per Maripak, it runs at about 20 cycles per minute, or up to 35 in the servo version, depending on size and film. It requires compressed air (6 bar) and 220 V three-phase, 80 A (480 V made to order).\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 80 A (480V three-phase available made to order). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFully automatic bundling with motorized infeed and discharge conveyors and a built-in shrink tunnel\u003c\/li\u003e\n\u003cli\u003e33″ cross seal, 31″ conveyor belt and film up to 31″ wide\u003c\/li\u003e\n\u003cli\u003eEncoder-controlled speed, automatic length detection and sensor\/PLC-controlled feeding\u003c\/li\u003e\n\u003cli\u003eSealing blade guided on linear bearings; motorized PE film drive rollers\u003c\/li\u003e\n\u003cli\u003eTunnel with adjustable conveyor speed, digital PID temperature control and airflow flaps\u003c\/li\u003e\n\u003cli\u003eColor touchscreen with production counter; format changes programmed on the panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBeverage producers bundling bottles and cans into multipacks\u003c\/li\u003e\n\u003cli\u003eFood and canned goods producers grouping cans, jars and cartons\u003c\/li\u003e\n\u003cli\u003eHousehold and chemical products shipped in PE-wrapped bundles instead of corrugated cases\u003c\/li\u003e\n\u003cli\u003eProducers using printed PE film with registration marks (option)\u003c\/li\u003e\n\u003cli\u003eLines that need bundles up to the 31″ belt width at about 20–35 cycles per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e65 ft\/min (adjustable speed available as an option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e20 cycles\/min (35 cycles\/min in the servo version), per Maripak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e14\", adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e38\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePE (polyethylene)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness (min. \/ max.)\u003c\/th\u003e\n\u003ctd\u003e1–3 mil \/ 30–80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e31\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e31\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 80 A (480V three-phase available made to order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e27 kW \/ 15 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e55\" × 138\" × 89\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2205 lbs \/ 2535 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLeft-to-right product flow (standard is right-to-left)\u003c\/li\u003e\n\u003cli\u003ePrinted film with registration mark detection\u003c\/li\u003e\n\u003cli\u003eFilm roll holders for top and bottom film at waist height\u003c\/li\u003e\n\u003cli\u003eSpare roll holder and manual film splicing\u003c\/li\u003e\n\u003cli\u003eServo version for higher speed\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960185016658,"sku":"MPK-MULTIMAC-D80","price":48595.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/MMACD80_01.jpg?v=1791317195"},{"product_id":"maripak-multimac-d-100-automatic-pe-shrink-bundler","title":"Maripak Multimac D 100 Automatic PE Shrink Bundler","description":"\u003cp\u003eThe Maripak Multimac D 100 is a fully automatic PE shrink bundler that wraps groups of bottles, cans or cartons in polyethylene shrink film. Infeed conveyor, sealer and shrink tunnel are built into one machine.\u003c\/p\u003e\n\u003cp\u003eIt has a 41″ cross seal and a 39″ conveyor belt and uses PE film of 1–3 mil (30–80 micron). Per Maripak, it runs at about 20 cycles per minute, or up to 35 in the servo version, depending on size and film. It requires compressed air (6 bar) and 220 V three-phase, 96 A (480 V made to order).\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 96 A (480V three-phase available made to order). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFully automatic bundling with motorized infeed and discharge conveyors and a built-in shrink tunnel\u003c\/li\u003e\n\u003cli\u003e41″ cross seal, 39″ conveyor belt and film up to 39″ wide\u003c\/li\u003e\n\u003cli\u003eEncoder-controlled speed, automatic length detection and sensor\/PLC-controlled feeding\u003c\/li\u003e\n\u003cli\u003eSealing blade guided on linear bearings; motorized PE film drive rollers\u003c\/li\u003e\n\u003cli\u003eTunnel with adjustable conveyor speed, digital PID temperature control and airflow flaps\u003c\/li\u003e\n\u003cli\u003eColor touchscreen with production counter; format changes programmed on the panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBeverage producers bundling bottles and cans into multipacks\u003c\/li\u003e\n\u003cli\u003eFood and canned goods producers grouping cans, jars and cartons\u003c\/li\u003e\n\u003cli\u003eHousehold and chemical products shipped in PE-wrapped bundles instead of corrugated cases\u003c\/li\u003e\n\u003cli\u003eProducers using printed PE film with registration marks (option)\u003c\/li\u003e\n\u003cli\u003eLines that need bundles up to the 39″ belt width at about 20–35 cycles per minute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e65 ft\/min (adjustable speed available as an option)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. cycles\u003c\/th\u003e\n\u003ctd\u003e20 cycles\/min (35 cycles\/min in the servo version), per Maripak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e14\", adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e38\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePE (polyethylene)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness (min. \/ max.)\u003c\/th\u003e\n\u003ctd\u003e1–3 mil \/ 30–80 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e41\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 96 A (480V three-phase available made to order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e32 kW \/ 17 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e63\" × 138\" × 89\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2601 lbs \/ 2976 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLeft-to-right product flow (standard is right-to-left)\u003c\/li\u003e\n\u003cli\u003ePrinted film with registration mark detection\u003c\/li\u003e\n\u003cli\u003eFilm roll holders for top and bottom film at waist height\u003c\/li\u003e\n\u003cli\u003eSpare roll holder and manual film splicing\u003c\/li\u003e\n\u003cli\u003eServo version for higher speed\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960185180498,"sku":"MPK-MULTIMAC-D100","price":59995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/MMACD100_01.jpg?v=1791317162"},{"product_id":"maripak-diamond-t-45-heat-shrink-tunnel","title":"Maripak Diamond T-45 Heat Shrink Tunnel, 18\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-45 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-45 has a 18″ wide conveyor belt and a 10″ (16″ optional) high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 51 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 51 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 18 kW \/ 10 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 18″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 51 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e18 kW \/ 10 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\", Opt 16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min - 30 mt \/ min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature range\u003c\/th\u003e\n\u003ctd\u003e0–500 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e42\" × 75\" × 53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e49 × 87 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e16\" high tunnel opening\u003c\/li\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960185246034,"sku":"MPK-T-45","price":10800.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T45_01.jpg?v=1791317382"},{"product_id":"maripak-diamond-t-60-heat-shrink-tunnel","title":"Maripak Diamond T-60 Heat Shrink Tunnel, 24\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-60 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-60 has a 24″ wide conveyor belt and a 10″ (16″ optional) high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 75 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 75 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 21 kW \/ 12 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 24″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 75 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e21 kW \/ 12 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\", Opt 16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e47\" × 75\" × 53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e53 × 81 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e16\" high tunnel opening\u003c\/li\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960185835858,"sku":"MPK-T-60","price":16350.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T60_01.jpg?v=1791317434"},{"product_id":"maripak-diamond-el-t-45-heat-shrink-tunnel","title":"Maripak Diamond EL T-45 Extended-Length Heat Shrink Tunnel, 18\" Belt","description":"\u003cp\u003eThe Maripak Diamond EL T-45 is a heat shrink tunnel with a single, extended-length heating chamber that keeps the pack in the heat longer. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe EL T-45 has a 18″ wide conveyor belt and a 10″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 72 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 72 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended-length heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 28 kW \/ 15 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 18″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber, extended length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 72 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e28 kW \/ 15 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e49 × 110 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e16\" or 19.5\" high door opening\u003c\/li\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960185966930,"sku":"MPK-EL-T-45","price":17260.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T45-EL_01.jpg?v=1791317418"},{"product_id":"maripak-diamond-el-t-60-heat-shrink-tunnel","title":"Maripak Diamond EL T-60 Extended-Length Heat Shrink Tunnel, 24\" Belt","description":"\u003cp\u003eThe Maripak Diamond EL T-60 is a heat shrink tunnel with a single, extended-length heating chamber that keeps the pack in the heat longer. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe EL T-60 has a 24″ wide conveyor belt and a 10″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase, 55 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 55 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended-length heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 35 kW \/ 19 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 24″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber, extended length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 55 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e35 kW \/ 19 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e47\" × 102\" × 53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e53 × 108 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2205 lbs \/ 2447 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e16\" or 19.5\" high door opening\u003c\/li\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960186261842,"sku":"MPK-EL-T-60","price":20250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T60-EL_01.jpg?v=1791317459"},{"product_id":"maripak-diamond-dc-t-45-heat-shrink-tunnel","title":"Maripak Diamond DC T-45 Double-Chamber Heat Shrink Tunnel, 18\" Belt","description":"\u003cp\u003eThe Maripak Diamond DC T-45 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-45 has a 18″ wide conveyor belt and a 10″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 72 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 72 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 35 kW \/ 19 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 18″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 72 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e35 kW \/ 19 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e49 × 136 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960186458450,"sku":"MPK-DC-T-45","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T45-DC28_01.jpg?v=1791317401"},{"product_id":"maripak-diamond-dc-t-60-heat-shrink-tunnel","title":"Maripak Diamond DC T-60 Double-Chamber Heat Shrink Tunnel, 24\" Belt","description":"\u003cp\u003eThe Maripak Diamond DC T-60 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-60 has a 24″ wide conveyor belt and a 10″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 88 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 88 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 43 kW \/ 24 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 24″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 88 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e43 kW \/ 24 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e47\" × 130\" × 53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e53 × 136 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2646 lbs \/ 2998 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960186753362,"sku":"MPK-DC-T-60","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T60-DC28_01.jpg?v=1791317446"},{"product_id":"maripak-diamond-dc-t-80-heat-shrink-tunnel","title":"Maripak Diamond DC T-80 Double-Chamber Heat Shrink Tunnel, 31\" Belt","description":"\u003cp\u003eThe Maripak Diamond DC T-80 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-80 has a 31″ wide conveyor belt and a 16″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 103 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 103 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 52 kW \/ 28 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 31″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 103 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e52 kW \/ 28 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e31\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e55\" × 130\" × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e59 × 136 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e3197 lbs \/ 3638 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960187015506,"sku":"MPK-DC-T-80","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T80-DC28_01.jpg?v=1791317484"},{"product_id":"maripak-diamond-t-80-heat-shrink-tunnel","title":"Maripak Diamond T-80 Heat Shrink Tunnel, 31\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-80 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-80 has a 31″ wide conveyor belt and a 16″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase, 50 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 50 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 34 kW \/ 19 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 31″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 50 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e34 kW \/ 19 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e31\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e55\" × 87\" × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e61 × 94 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2006 lbs \/ 2205 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960187146578,"sku":"MPK-T-80","price":30255.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T80_01.jpg?v=1791317471"},{"product_id":"maripak-diamond-dc-t-100-heat-shrink-tunnel","title":"Maripak Diamond DC T-100 Double-Chamber Heat Shrink Tunnel, 39\" Belt","description":"\u003cp\u003eThe Maripak Diamond DC T-100 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-100 has a 39″ wide conveyor belt. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003eno compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 39″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960187179346,"sku":"MPK-DC-T-100","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/DC-T-100_01.jpg?v=1791316912"},{"product_id":"maripak-diamond-dc-t-120-heat-shrink-tunnel","title":"Maripak Diamond DC T-120 Double-Chamber Heat Shrink Tunnel","description":"\u003cp\u003eThe Maripak Diamond DC T-120 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-120 has a conveyor belt whose width Maripak confirms with the quote. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 165 A (other voltages available); no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 165 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003eno compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the tunnel belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 165 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960187277650,"sku":"MPK-DC-T-120","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/DC-T-120_01.jpg?v=1791316924"},{"product_id":"maripak-diamond-dc-t-150-heat-shrink-tunnel","title":"Maripak Diamond DC T-150 Double-Chamber Heat Shrink Tunnel","description":"\u003cp\u003eThe Maripak Diamond DC T-150 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-150 has a conveyor belt whose width Maripak confirms with the quote. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 195 A, or 400 V three-phase, 76 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 195 A, or 400V three-phase, 76 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003eno compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the tunnel belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 195 A, or 400V three-phase, 76 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960188064082,"sku":"MPK-DC-T-150","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/DC-T-150_01.jpg?v=1791316936"},{"product_id":"maripak-diamond-t-100-heat-shrink-tunnel","title":"Maripak Diamond T-100 Heat Shrink Tunnel, 39\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-100 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-100 has a 39″ wide conveyor belt and a 16″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase, 60 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 60 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 35 kW \/ 20 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 39″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 60 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e35 kW \/ 20 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e63\" × 87\" × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e66 × 94 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2425 lbs \/ 2668 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960188162386,"sku":"MPK-T-100","price":42980.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T100_01.jpg?v=1791317317"},{"product_id":"maripak-diamond-t-120-heat-shrink-tunnel","title":"Maripak Diamond T-120 Heat Shrink Tunnel, 47\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-120 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-120 has a 47″ wide conveyor belt and a 16″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase, 65 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 65 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 36 kW \/ 20 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 47″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 65 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e36 kW \/ 20 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e70\" × 87\" × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e76 × 94 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2976 lbs \/ 3285 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960188293458,"sku":"MPK-T-120","price":53990.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T120_01.jpg?v=1791317337"},{"product_id":"maripak-diamond-t-150-heat-shrink-tunnel","title":"Maripak Diamond T-150 Heat Shrink Tunnel, 59\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-150 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-150 has a 59″ wide conveyor belt and a 16″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase, 75 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 75 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 43 kW \/ 24 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 59″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 75 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e43 kW \/ 24 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e82\" × 87\" × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e88 × 94 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e3527 lbs \/ 3902 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960188424530,"sku":"MPK-T-150","price":67900.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T150_01.jpg?v=1791317358"},{"product_id":"aie-infrared-shrink-tunnel","title":"AIE Infrared Shrink Tunnel","description":"\u003cp\u003eAIE infrared shrink tunnels shrink the film around products after they have been sealed in an L-bar or I-bar sealer. The sealed pack rides through on a conveyor while the heat shrinks the film tight.\u003c\/p\u003e\n\u003cp\u003eThe AIE-S3515 has a 14″ × 6″ tunnel opening and heats from 4 sides with 10 replaceable infrared tubes (5 kW, 220 V). Its conveyor speed is adjustable up to 20 ft\/min, and the upper and lower heaters have separate temperature controllers. Larger openings of 16″ × 8″ and 16″ × 12″ and a version with stand are available; their data is on request.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e220 V (AIE-S3515, per AIE); other models on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day manufacturer warranty from the date you receive the equipment (AIE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable unless AIE approves the return in writing. Returns only with our written Return Authorization. Report damage, defects, missing or wrong items in writing with photos within 5 business days of delivery. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips from AIE in City of Industry, California, by UPS or LTL freight. Freight is quoted before you pay.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInfrared heating from 4 sides with 10 replaceable tubes (AIE-S3515, 5 kW)\u003c\/li\u003e\n\u003cli\u003eSeparate temperature controllers for the upper and lower heaters\u003c\/li\u003e\n\u003cli\u003eConveyor speed adjustable up to 20 ft\/min (AIE-S3515)\u003c\/li\u003e\n\u003cli\u003eTunnel openings 14″ × 6″, 16″ × 8″ and 16″ × 12″; 14″ × 6″ also with stand\u003c\/li\u003e\n\u003cli\u003eCasters make the tunnel easy to move; Teflon mesh conveyor belt optional\u003c\/li\u003e\n\u003cli\u003eAIE-S3515: 220 V, 48″ L × 24″ W × 20″ H, 176 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFood items, books, toys and stationery, as named by AIE\u003c\/li\u003e\n\u003cli\u003ePharmaceuticals, parts and hardware in retail shrink packs\u003c\/li\u003e\n\u003cli\u003eBusinesses moving from a heat gun to consistent tunnel shrinking\u003c\/li\u003e\n\u003cli\u003eAIE L-bar and I-bar shrink systems that need a matching tunnel\u003c\/li\u003e\n\u003cli\u003eSmall production lines with packs up to 16″ wide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTunnel size (W × H)\u003c\/th\u003e\n\u003cth\u003eNote\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515\u003c\/th\u003e\n\u003ctd\u003e14\" × 6\"\u003c\/td\u003e\n\u003ctd\u003eData below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S1406\u003c\/th\u003e\n\u003ctd\u003e14\" × 6\"\u003c\/td\u003e\n\u003ctd\u003eWith stand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S1608\u003c\/th\u003e\n\u003ctd\u003e16\" × 8\"\u003c\/td\u003e\n\u003ctd\u003eData on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S1612\u003c\/th\u003e\n\u003ctd\u003e16\" × 12\"\u003c\/td\u003e\n\u003ctd\u003eData on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515 heater\u003c\/th\u003e\n\u003ctd\u003e5 kW, 10 infrared tubes, heating on 4 sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515 voltage\u003c\/th\u003e\n\u003ctd\u003e220 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515 conveyor speed\u003c\/th\u003e\n\u003ctd\u003eUp to 20 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515 dimensions\u003c\/th\u003e\n\u003ctd\u003e48\" L × 24\" W × 20\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515 weight\u003c\/th\u003e\n\u003ctd\u003e176 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eData per AIE (theaiecompany.com and AIE instruction manuals, October 2026). Metric values are AIE's; inch\/lb values are converted and rounded. Custom lengths and seal widths are available from AIE on request.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eAIE warrants its products for 180 days from the date you receive the equipment. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"AIE","offers":[{"title":"14\" × 6\" (AIE-S3515)","offer_id":54995282035026,"sku":"AIE-S3515","price":4073.0,"currency_code":"USD","in_stock":false},{"title":"14\" × 6\" with stand (AIE-S1406)","offer_id":54995282067794,"sku":"AIE-S1406","price":4560.0,"currency_code":"USD","in_stock":false},{"title":"16\" × 8\" (AIE-S1608)","offer_id":54995282100562,"sku":"AIE-S1608","price":5537.0,"currency_code":"USD","in_stock":false},{"title":"16\" × 12\" (AIE-S1612)","offer_id":54995282133330,"sku":"AIE-S1612","price":5648.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/AIES3515-1.jpg?v=1791491106"},{"product_id":"aie-l-bar-shrink-wrap-system","title":"AIE L-Bar Shrink Wrap System with Film Rack","description":"\u003cp\u003eThe AIE L-Bar Series is an all-in-one shrink wrap system with a dual impulse sealing bar. The L-shaped bar seals and trims two sides of a centerfold film pouch in one stroke, and the film rack holds the roll in place for the next pack.\u003c\/p\u003e\n\u003cp\u003eIt is simple to use with a three-step operation and needs no warm-up. The bar seals PP, PVC and PE film up to 0.025 mm thick with 500 W power, and the average seal time is 1–4 seconds. Four sizes from 13″ × 13″ to 24″ × 32″. Film and heat gun are sold separately.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eImpulse dual bar sealer, timer, film rack dispenser, outlet plug and parts kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eShrink film and heat gun (sold separately, per AIE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day manufacturer warranty from the date you receive the equipment (AIE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable unless AIE approves the return in writing. Returns only with our written Return Authorization. Report damage, defects, missing or wrong items in writing with photos within 5 business days of delivery. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips from AIE in City of Industry, California, by UPS or LTL freight. Freight is quoted before you pay.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual impulse L-bar seals and trims two sides of the pack in one stroke\u003c\/li\u003e\n\u003cli\u003eNo warm-up: impulse heat only during the seal\u003c\/li\u003e\n\u003cli\u003eSeals PP, PVC and PE shrink film up to 0.025 mm thick\u003c\/li\u003e\n\u003cli\u003eAverage seal time 1–4 seconds; 500 W power\u003c\/li\u003e\n\u003cli\u003eFour seal areas: 13″ × 13″, 18″ × 18″, 16″ × 24″ and 24″ × 32″\u003c\/li\u003e\n\u003cli\u003eFilm rack dispenser, timer, outlet plug and parts kit included; film and heat gun sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRetail packers shrink wrapping boxes, gift sets and multipacks\u003c\/li\u003e\n\u003cli\u003eSmall manufacturers protecting products from dust, moisture and pilferage\u003c\/li\u003e\n\u003cli\u003eBakeries and food producers wrapping trays and boxed goods\u003c\/li\u003e\n\u003cli\u003ePrint shops and publishers wrapping books and stacks of paper\u003c\/li\u003e\n\u003cli\u003eStart-ups that want L-bar shrink packaging without a tunnel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSealing size\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-1313L\u003c\/th\u003e\n\u003ctd\u003e13\" × 13\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-1818L\u003c\/th\u003e\n\u003ctd\u003e18\" × 18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-1624L\u003c\/th\u003e\n\u003ctd\u003e16\" × 24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-2432L\u003c\/th\u003e\n\u003ctd\u003e24\" × 32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal\u003c\/th\u003e\n\u003ctd\u003eDual impulse seal and trim (AIE: round wire; 2 mm seal for the 1624L page)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm\u003c\/th\u003e\n\u003ctd\u003ePP, PVC, PE up to 0.025 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal time\u003c\/th\u003e\n\u003ctd\u003e1–4 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eData per AIE (theaiecompany.com and AIE instruction manuals, October 2026). Metric values are AIE's; inch\/lb values are converted and rounded. Custom lengths and seal widths are available from AIE on request.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eAIE warrants its products for 180 days from the date you receive the equipment. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"AIE","offers":[{"title":"13\" × 13\" (AIE-1313L)","offer_id":54995284361554,"sku":"AIE-1313L","price":945.5,"currency_code":"USD","in_stock":false},{"title":"18\" × 18\" (AIE-1818L)","offer_id":54995284394322,"sku":"AIE-1818L","price":1187.0,"currency_code":"USD","in_stock":false},{"title":"16\" × 24\" (AIE-1624L)","offer_id":54995284427090,"sku":"AIE-1624L","price":1939.0,"currency_code":"USD","in_stock":false},{"title":"24\" × 32\" (AIE-2432L)","offer_id":54995284459858,"sku":"AIE-2432L","price":2190.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/AIE1313LFinal-1.webp?v=1791491109"},{"product_id":"aie-2040i-i-bar-shrink-wrap-system-40","title":"AIE-2040I 40\" I-Bar Shrink Wrap System with Heat Gun and Film","description":"\u003cp\u003eThe AIE-2040I is a complete shrink wrap system with a 40″ impulse bar sealer. The product goes into a pouch of centerfold shrink film, the straight bar seals the open sides one after the other, and the heat gun shrinks the film tight around the product.\u003c\/p\u003e\n\u003cp\u003eIt is simple to use with a three-step operation and needs no warm-up. The kit includes the 40″ impulse bar sealer, a timer, a two-speed heat gun with holder, a film rack, a free 500 ft roll of 75 gauge centerfold PVC shrink film, an outlet plug and a parts kit.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003e40\" impulse bar sealer, timer, two-speed heat gun and holder, film rack, free 500 ft roll of 75 gauge centerfold PVC shrink film, outlet plug, parts kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day manufacturer warranty from the date you receive the equipment (AIE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable unless AIE approves the return in writing. Returns only with our written Return Authorization. Report damage, defects, missing or wrong items in writing with photos within 5 business days of delivery. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips from AIE in City of Industry, California, by UPS or LTL freight. Freight is quoted before you pay.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e40″ impulse bar sealer with round wire: one long seal covers large or long products that do not fit an L-bar\u003c\/li\u003e\n\u003cli\u003eNo warm-up: impulse heat only during the seal\u003c\/li\u003e\n\u003cli\u003eTwo-speed heat gun with holder included: the lower setting for thin film, the higher one for faster shrinking\u003c\/li\u003e\n\u003cli\u003eFilm rack included to hold the centerfold film roll at the sealer, so the film feeds straight\u003c\/li\u003e\n\u003cli\u003eFree 500 ft roll of 75 gauge centerfold PVC shrink film to start\u003c\/li\u003e\n\u003cli\u003eTimer, outlet plug and parts kit included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOccasional shrink wrapping of gift sets, small batches and spare parts, where a tunnel would sit idle\u003c\/li\u003e\n\u003cli\u003eLong products such as tubes, frames and boards up to 40″\u003c\/li\u003e\n\u003cli\u003eRetail and craft businesses starting with shrink packaging\u003c\/li\u003e\n\u003cli\u003eProducts that change size from week to week, where a fixed L-bar seal area would not fit\u003c\/li\u003e\n\u003cli\u003eBusinesses that want a complete kit in one order\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAIE-2040I\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal length\u003c\/th\u003e\n\u003ctd\u003e40\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal\u003c\/th\u003e\n\u003ctd\u003eRound wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eData per AIE (theaiecompany.com and AIE instruction manuals, October 2026). Metric values are AIE's; inch\/lb values are converted and rounded. Custom lengths and seal widths are available from AIE on request.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eAIE warrants its products for 180 days from the date you receive the equipment. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"AIE","offers":[{"title":"Default Title","offer_id":54995291603282,"sku":"AIE-2040I","price":832.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/AIE2013IFinal-1.webp?v=1791491110"},{"product_id":"aie-800pi-portable-i-bar-shrink-wrap-system-32","title":"AIE-800PI 32\" Portable I-Bar Shrink Wrap System","description":"\u003cp\u003eThe AIE-800PI is a portable I-bar shrink wrap system with a hand-held 32″ impulse sealer that seals and trims in one operation. Instead of lifting the product onto a sealer, the operator brings the sealer to the product.\u003c\/p\u003e\n\u003cp\u003eThat makes it a good fit for large items and products with unusual shapes. A micro switch activates the sealing and trimming wire, the temperature timer is adjustable, and an 8 ft cord connects the controller to the hand unit. A two-speed heat gun, a film rack and a free 500 ft roll of 75 gauge centerfold shrink film are included.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003ePortable impulse bar sealer (seals and trims), temperature timer, two-speed heat gun, film rack, free 500 ft roll of 75 gauge centerfold shrink film, protective sealing pad, outlet plug, parts kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day manufacturer warranty from the date you receive the equipment (AIE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable unless AIE approves the return in writing. Returns only with our written Return Authorization. Report damage, defects, missing or wrong items in writing with photos within 5 business days of delivery. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips from AIE in City of Industry, California, by UPS or LTL freight. Freight is quoted before you pay.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHand-held 32″ impulse sealer: bring the sealer to large or awkward products\u003c\/li\u003e\n\u003cli\u003eSeals and trims in one operation with a flat wire\u003c\/li\u003e\n\u003cli\u003eMicro switch activates the sealing and trimming wire, so each seal starts exactly when the bar is in place\u003c\/li\u003e\n\u003cli\u003eAdjustable temperature timer; 8 ft cord between controller and hand unit\u003c\/li\u003e\n\u003cli\u003eTwo-speed heat gun and film rack included\u003c\/li\u003e\n\u003cli\u003eFree 500 ft roll of 75 gauge centerfold shrink film to start\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLarge items that are too heavy to lift onto a table sealer, such as cases, equipment or furniture parts\u003c\/li\u003e\n\u003cli\u003eProducts with unusual shapes such as furniture parts or equipment\u003c\/li\u003e\n\u003cli\u003eWrapping items where they stand, for example on a cart, a pallet or a work bench\u003c\/li\u003e\n\u003cli\u003eSmall businesses shrink wrapping a few large items per day without a dedicated packing station\u003c\/li\u003e\n\u003cli\u003eWorkshops that need shrink packaging without a fixed station\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAIE-800PI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal length\u003c\/th\u003e\n\u003ctd\u003e32\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal\u003c\/th\u003e\n\u003ctd\u003eSeal and trim, flat wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCord\u003c\/th\u003e\n\u003ctd\u003e8 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eData per AIE (theaiecompany.com and AIE instruction manuals, October 2026). Metric values are AIE's; inch\/lb values are converted and rounded. Custom lengths and seal widths are available from AIE on request.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eAIE warrants its products for 180 days from the date you receive the equipment. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"AIE","offers":[{"title":"Default Title","offer_id":54995295797586,"sku":"AIE-800PI","price":858.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/AIE300Pi-5.jpg?v=1791491114"}],"url":"https:\/\/uspackingequipment.com\/collections\/shrink-packaging.oembed","provider":"US Packing Equipment","version":"1.0","type":"link"}