{"title":"Shrink Tunnels","description":"\u003cp\u003eHeat shrink tunnels shrink film evenly around sealed packs while they ride through on a conveyor. We carry Maripak Diamond tunnels in single-chamber, extended-length and double-chamber versions with 18″ to 59″ belts, and AIE infrared tunnels for smaller packs. All work behind L-bar, side and PE sealers.\u003c\/p\u003e","products":[{"product_id":"maripak-tmc-pro-5844-m-l-bar-sealer-shrink-tunnel-combo","title":"Maripak TMC Pro 5844-M L-Bar Sealer and Shrink Tunnel Combination, 23\" × 17\"","description":"\u003cp\u003eThe Maripak TMC Pro 5844-M combines a semi-automatic L-bar sealer and a heat shrink tunnel in one machine. The pack is sealed and then carried straight into the tunnel, so you get a complete shrink line in one footprint.\u003c\/p\u003e\n\u003cp\u003eAn electric motor closes the sealing bar, so no compressed air is needed. Per Maripak, it wraps about 10–12 packs per minute. The seal area is 23″ × 17″, and the maximum product size is 12″ × 18″ × 7″ (W × L × H). It runs on 220 V single-phase, 50 A.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 50 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eL-bar sealer and heat shrink tunnel in one machine: one footprint, one power connection\u003c\/li\u003e\n\u003cli\u003eMotor-driven sealing bar: no compressed air needed\u003c\/li\u003e\n\u003cli\u003eAutomatic or free mode; safety sensor stops the cycle on an obstacle\u003c\/li\u003e\n\u003cli\u003eAutomatic trim winder included to collect the film scrap\u003c\/li\u003e\n\u003cli\u003eTunnel with adjustable conveyor and fan speed, digital PID temperature control and airflow side flaps\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 158 °F before switch-off, plus over-temperature protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSmall and medium producers that want a complete shrink line in one machine, with one supplier for sealer and tunnel\u003c\/li\u003e\n\u003cli\u003eFood, cosmetics and retail packers with products up to 12″ × 18″ × 7″\u003c\/li\u003e\n\u003cli\u003eBusinesses moving up from a hood sealer that need more packs per hour\u003c\/li\u003e\n\u003cli\u003eFacilities without compressed air\u003c\/li\u003e\n\u003cli\u003ePacking rooms with limited floor space\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10–12 packs\/min (per Maripak; depends on package size and film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product height\u003c\/th\u003e\n\u003ctd\u003e7\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF: 7-37 micron \/ PVC: 15-25 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e23\" × 17\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product size (W × L × H)\u003c\/th\u003e\n\u003ctd\u003e12\" × 18\" × 7\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 50 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e11 kW \/ 6 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e37 × 91 × 63\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e45 × 98 × 71\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e1080 lbs \/ 1235 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCrated weight\u003c\/th\u003e\n\u003ctd\u003e2400 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFoot pedal\u003c\/li\u003e\n\u003cli\u003eTunnel conveyor belt alternatives: metal mesh, Teflon mesh or heat-resistant plastic modular belt\u003c\/li\u003e\n\u003cli\u003eStainless steel version for wet or damp environments\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960172466514,"sku":"MPK-TMC-PRO-5844-M","price":13890.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/TMC5844-M_01.png?v=1791316861"},{"product_id":"maripak-tmc-pro-8065-m-l-bar-sealer-shrink-tunnel-combo","title":"Maripak TMC Pro 8065-M L-Bar Sealer and Shrink Tunnel Combination, 32\" × 26\"","description":"\u003cp\u003eThe Maripak TMC Pro 8065-M combines a semi-automatic L-bar sealer and a heat shrink tunnel in one machine, with a large 32″ × 26″ seal area. The pack is sealed and carried straight into the tunnel for shrinking.\u003c\/p\u003e\n\u003cp\u003eAn electric motor closes the sealing bar, so no compressed air is needed. Per Maripak, it wraps about 10–12 packs per minute and takes film up to 28″ wide. It runs on 220 V three-phase, 40 A. The maximum product size is available on request.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 40 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eL-bar sealer and heat shrink tunnel in one machine with a 32″ × 26″ seal area\u003c\/li\u003e\n\u003cli\u003eMotor-driven sealing bar: no compressed air needed\u003c\/li\u003e\n\u003cli\u003eAutomatic or free mode with safety sensor\u003c\/li\u003e\n\u003cli\u003eAutomatic trim winder included\u003c\/li\u003e\n\u003cli\u003eTunnel with adjustable conveyor and fan speed, digital PID temperature control and airflow flaps\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 158 °F before switch-off; 220 V three-phase, 40 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProducers of larger packs who want sealer and tunnel in one machine instead of two units to align\u003c\/li\u003e\n\u003cli\u003eFood and beverage multipacks and large trays up to the 32″ × 26″ seal area\u003c\/li\u003e\n\u003cli\u003eHome goods and hardware packers with bulky products that need a tight, clear wrap\u003c\/li\u003e\n\u003cli\u003eFacilities with a three-phase supply and no compressed air\u003c\/li\u003e\n\u003cli\u003eOperations replacing separate sealer and tunnel units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e10–12 packs\/min (per Maripak; depends on package size and film)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e33\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF: 7-37 micron \/ PVC: 15-25 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eMotorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e32\" × 26\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e28\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required (motor-driven sealing bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 40 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e11 kW \/ 6 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e52\" × 130\" × 49\" without gravity conveyor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e66\" × 142\" × 55\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet weight\u003c\/th\u003e\n\u003ctd\u003e2400 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCrated weight\u003c\/th\u003e\n\u003ctd\u003e3400 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFoot pedal\u003c\/li\u003e\n\u003cli\u003eTunnel conveyor belt alternatives: metal mesh, Teflon mesh or heat-resistant plastic modular belt\u003c\/li\u003e\n\u003cli\u003eStainless steel version for wet or damp environments\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960172564818,"sku":"MPK-TMC-PRO-8065-M","price":22995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/TMC8065-M_01.png?v=1791317503"},{"product_id":"maripak-cls-compact-automatic-l-sealer-shrink-tunnel-combo","title":"Maripak CLS Compact Automatic L-Sealer and Shrink Tunnel Combination","description":"\u003cp\u003eThe Maripak CLS Compact is a fully automatic L-sealer and heat shrink tunnel in one compact machine, built for continuous operation. Products are wrapped, sealed and shrunk in one pass, without separate machines to line up.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, the conveyor runs at up to about 66 ft\/min (adjustable). The L-sealer size is 17″ × 18″ for products up to 4.5″ high. The machine requires compressed air (6 bar) and 220 V single-phase, 75 A, or 220 V three-phase, 45 A, made to order.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 75 A (220V three-phase, 45 A, available made to order). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomatic L-sealer and shrink tunnel in one machine\u003c\/li\u003e\n\u003cli\u003eProduct length detection by sensor, synchronized with encoder control\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder with tension control\u003c\/li\u003e\n\u003cli\u003eRemote access (SMART KonecT) included per Maripak\u003c\/li\u003e\n\u003cli\u003eTunnel with adjustable conveyor speed, digital PID temperature control and airflow flaps\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 158 °F; production counter; compressed air required (6 bar)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProducers of small to medium packs who need fully automatic output in a single machine\u003c\/li\u003e\n\u003cli\u003eFood, cosmetics and pharmaceutical retail packs up to 4.5″ high, such as cartons and trays\u003c\/li\u003e\n\u003cli\u003eFacilities with limited space for a separate sealer, tunnel and linking conveyor\u003c\/li\u003e\n\u003cli\u003eContract packers running continuous shifts, with remote access for troubleshooting\u003c\/li\u003e\n\u003cli\u003eLines that already have compressed air available at the packing area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eSealer opening\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. product height\u003c\/th\u003e\n\u003ctd\u003e4.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e66 ft\/min (adjustable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal area\u003c\/th\u003e\n\u003ctd\u003e17\" × 18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e13\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. package width\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm thickness (min. \/ max.)\u003c\/th\u003e\n\u003ctd\u003e60–160 gauge \/ 15–40 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eRequired (6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V single-phase, 75 A (220V three-phase, 45 A, available made to order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e16 kW \/ 10 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e63 × 128 × 73\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e70 × 134 × 76\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2200 lbs \/ 2205 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCrated weight\u003c\/th\u003e\n\u003ctd\u003e3150 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpecial linking conveyor for small products\u003c\/li\u003e\n\u003cli\u003eSpeed control for SMART Sync infeed and discharge conveyors\u003c\/li\u003e\n\u003cli\u003eAdditional photo-eye for vertical or horizontal product detection\u003c\/li\u003e\n\u003cli\u003eAutomatic lubrication system\u003c\/li\u003e\n\u003cli\u003eCenter-seal system for different product heights\u003c\/li\u003e\n\u003cli\u003eHeat-resistant plastic modular tunnel conveyor\u003c\/li\u003e\n\u003cli\u003eSiemens control system\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960173384018,"sku":"MPK-CLS-COMPACT-4245","price":47750.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/CLS-Compact-4245_01.jpg?v=1791316900"},{"product_id":"maripak-sympack-35-side-sealer-shrink-tunnel-combo","title":"Maripak SYMPACK 35 Side Sealer and Shrink Tunnel Combination","description":"\u003cp\u003eThe Maripak SYMPACK 35 combines a fully automatic side sealer and a heat shrink tunnel in one machine, for lines with limited floor space. Products are wrapped, sealed and shrunk in one pass, without a separate tunnel to connect and align.\u003c\/p\u003e\n\u003cp\u003ePer Maripak, the conveyor runs at up to about 98 ft\/min. The side seal is actuated by a solenoid, so the standard unit needs no compressed air. The maximum package size is about 13″ × 20″ × 7″ (W × L × H), and the machine runs on 220–240 V three-phase power.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220–240V three-phase. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSide sealer and heat shrink tunnel in one machine: one footprint and one power connection\u003c\/li\u003e\n\u003cli\u003eSolenoid-actuated side seal: no compressed air for the standard unit\u003c\/li\u003e\n\u003cli\u003eAutomatic product length detection by sensor, synchronized with encoder control\u003c\/li\u003e\n\u003cli\u003eMotorized film unwind and automatic trim winder with tension control\u003c\/li\u003e\n\u003cli\u003eColor touchscreen; feeding frequency controlled by sensor and PLC\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 158 °F before switch-off; tunnel belt alternatives available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProducers that need automatic shrink packaging in a small footprint\u003c\/li\u003e\n\u003cli\u003eFood, cosmetics and household products up to 13″ × 20″ × 7″\u003c\/li\u003e\n\u003cli\u003ePrinting and stationery packs wrapped at line speed without a separate tunnel to set up\u003c\/li\u003e\n\u003cli\u003eFacilities without compressed air at the packing line\u003c\/li\u003e\n\u003cli\u003eBusinesses replacing a semi-automatic L-bar and separate tunnel with one automatic machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. package size\u003c\/th\u003e\n\u003ctd\u003e13\" w × 20\" l × 7\" h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal bar opening\u003c\/th\u003e\n\u003ctd\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCross seal length\u003c\/th\u003e\n\u003ctd\u003e17\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e14\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMin. package width\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film width\u003c\/th\u003e\n\u003ctd\u003e22\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilm types\u003c\/th\u003e\n\u003ctd\u003ePOF, PE, PVC - 15-60 micron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. film roll diameter\u003c\/th\u003e\n\u003ctd\u003e11\", standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eServo driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required for the standard unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220–240V three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e14 kW \/ 9 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTunnel conveyor belt alternatives: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eRaised working height\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960184688978,"sku":"MPK-SYMPACK-35","price":59995.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/SYMP35_01.jpg?v=1791317297"},{"product_id":"maripak-diamond-t-45-heat-shrink-tunnel","title":"Maripak Diamond T-45 Heat Shrink Tunnel, 18\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-45 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-45 has a 18″ wide conveyor belt and a 10″ (16″ optional) high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 51 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 51 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 18 kW \/ 10 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 18″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 51 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e18 kW \/ 10 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\", Opt 16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor speed\u003c\/th\u003e\n\u003ctd\u003e98 ft\/min - 30 mt \/ min, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature range\u003c\/th\u003e\n\u003ctd\u003e0–500 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e42\" × 75\" × 53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e49 × 87 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e16\" high tunnel opening\u003c\/li\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960185246034,"sku":"MPK-T-45","price":10800.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T45_01.jpg?v=1791317382"},{"product_id":"maripak-diamond-t-60-heat-shrink-tunnel","title":"Maripak Diamond T-60 Heat Shrink Tunnel, 24\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-60 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-60 has a 24″ wide conveyor belt and a 10″ (16″ optional) high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 75 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 75 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 21 kW \/ 12 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 24″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 75 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e21 kW \/ 12 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\", Opt 16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e47\" × 75\" × 53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e53 × 81 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e16\" high tunnel opening\u003c\/li\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960185835858,"sku":"MPK-T-60","price":16350.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T60_01.jpg?v=1791317434"},{"product_id":"maripak-diamond-el-t-45-heat-shrink-tunnel","title":"Maripak Diamond EL T-45 Extended-Length Heat Shrink Tunnel, 18\" Belt","description":"\u003cp\u003eThe Maripak Diamond EL T-45 is a heat shrink tunnel with a single, extended-length heating chamber that keeps the pack in the heat longer. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe EL T-45 has a 18″ wide conveyor belt and a 10″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 72 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 72 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended-length heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 28 kW \/ 15 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 18″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber, extended length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 72 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e28 kW \/ 15 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e49 × 110 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e16\" or 19.5\" high door opening\u003c\/li\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960185966930,"sku":"MPK-EL-T-45","price":17260.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T45-EL_01.jpg?v=1791317418"},{"product_id":"maripak-diamond-el-t-60-heat-shrink-tunnel","title":"Maripak Diamond EL T-60 Extended-Length Heat Shrink Tunnel, 24\" Belt","description":"\u003cp\u003eThe Maripak Diamond EL T-60 is a heat shrink tunnel with a single, extended-length heating chamber that keeps the pack in the heat longer. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe EL T-60 has a 24″ wide conveyor belt and a 10″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase, 55 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 55 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExtended-length heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 35 kW \/ 19 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 24″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber, extended length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 55 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e35 kW \/ 19 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e47\" × 102\" × 53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e53 × 108 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2205 lbs \/ 2447 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e16\" or 19.5\" high door opening\u003c\/li\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960186261842,"sku":"MPK-EL-T-60","price":20250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T60-EL_01.jpg?v=1791317459"},{"product_id":"maripak-diamond-dc-t-45-heat-shrink-tunnel","title":"Maripak Diamond DC T-45 Double-Chamber Heat Shrink Tunnel, 18\" Belt","description":"\u003cp\u003eThe Maripak Diamond DC T-45 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-45 has a 18″ wide conveyor belt and a 10″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 72 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 72 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 35 kW \/ 19 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 18″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 72 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e35 kW \/ 19 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e49 × 136 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960186458450,"sku":"MPK-DC-T-45","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T45-DC28_01.jpg?v=1791317401"},{"product_id":"maripak-diamond-dc-t-60-heat-shrink-tunnel","title":"Maripak Diamond DC T-60 Double-Chamber Heat Shrink Tunnel, 24\" Belt","description":"\u003cp\u003eThe Maripak Diamond DC T-60 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-60 has a 24″ wide conveyor belt and a 10″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 88 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 88 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 43 kW \/ 24 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 24″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 88 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e43 kW \/ 24 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e47\" × 130\" × 53\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e53 × 136 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2646 lbs \/ 2998 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960186753362,"sku":"MPK-DC-T-60","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T60-DC28_01.jpg?v=1791317446"},{"product_id":"maripak-diamond-dc-t-80-heat-shrink-tunnel","title":"Maripak Diamond DC T-80 Double-Chamber Heat Shrink Tunnel, 31\" Belt","description":"\u003cp\u003eThe Maripak Diamond DC T-80 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-80 has a 31″ wide conveyor belt and a 16″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 103 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 103 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 52 kW \/ 28 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 31″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 103 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e52 kW \/ 28 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e31\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e55\" × 130\" × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e59 × 136 × 64\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e3197 lbs \/ 3638 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960187015506,"sku":"MPK-DC-T-80","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T80-DC28_01.jpg?v=1791317484"},{"product_id":"maripak-diamond-t-80-heat-shrink-tunnel","title":"Maripak Diamond T-80 Heat Shrink Tunnel, 31\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-80 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-80 has a 31″ wide conveyor belt and a 16″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase, 50 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 50 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 34 kW \/ 19 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 31″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 50 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e34 kW \/ 19 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e31\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e55\" × 87\" × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e61 × 94 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2006 lbs \/ 2205 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960187146578,"sku":"MPK-T-80","price":30255.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T80_01.jpg?v=1791317471"},{"product_id":"maripak-diamond-dc-t-100-heat-shrink-tunnel","title":"Maripak Diamond DC T-100 Double-Chamber Heat Shrink Tunnel, 39\" Belt","description":"\u003cp\u003eThe Maripak Diamond DC T-100 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-100 has a 39″ wide conveyor belt. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003eno compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 39″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960187179346,"sku":"MPK-DC-T-100","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/DC-T-100_01.jpg?v=1791316912"},{"product_id":"maripak-diamond-dc-t-120-heat-shrink-tunnel","title":"Maripak Diamond DC T-120 Double-Chamber Heat Shrink Tunnel","description":"\u003cp\u003eThe Maripak Diamond DC T-120 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-120 has a conveyor belt whose width Maripak confirms with the quote. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 165 A (other voltages available); no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 165 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003eno compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the tunnel belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 165 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960187277650,"sku":"MPK-DC-T-120","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/DC-T-120_01.jpg?v=1791316924"},{"product_id":"maripak-diamond-dc-t-150-heat-shrink-tunnel","title":"Maripak Diamond DC T-150 Double-Chamber Heat Shrink Tunnel","description":"\u003cp\u003eThe Maripak Diamond DC T-150 is a heat shrink tunnel with two heating chambers in a row for more heating length. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe DC T-150 has a conveyor belt whose width Maripak confirms with the quote. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 220 V three-phase, 195 A, or 400 V three-phase, 76 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 195 A, or 400V three-phase, 76 A. Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice on request. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003eno compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the tunnel belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eHigher-speed lines where a single chamber would need a slower belt\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eDouble chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V three-phase, 195 A, or 400V three-phase, 76 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960188064082,"sku":"MPK-DC-T-150","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/DC-T-150_01.jpg?v=1791316936"},{"product_id":"maripak-diamond-t-100-heat-shrink-tunnel","title":"Maripak Diamond T-100 Heat Shrink Tunnel, 39\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-100 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-100 has a 39″ wide conveyor belt and a 16″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase, 60 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 60 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 35 kW \/ 20 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 39″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 60 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e35 kW \/ 20 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e63\" × 87\" × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e66 × 94 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2425 lbs \/ 2668 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960188162386,"sku":"MPK-T-100","price":42980.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T100_01.jpg?v=1791317317"},{"product_id":"maripak-diamond-t-120-heat-shrink-tunnel","title":"Maripak Diamond T-120 Heat Shrink Tunnel, 47\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-120 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-120 has a 47″ wide conveyor belt and a 16″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase, 65 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 65 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 36 kW \/ 20 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 47″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 65 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e36 kW \/ 20 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e47\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e70\" × 87\" × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e76 × 94 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e2976 lbs \/ 3285 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960188293458,"sku":"MPK-T-120","price":53990.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T120_01.jpg?v=1791317337"},{"product_id":"maripak-diamond-t-150-heat-shrink-tunnel","title":"Maripak Diamond T-150 Heat Shrink Tunnel, 59\" Belt","description":"\u003cp\u003eThe Maripak Diamond T-150 is a heat shrink tunnel with a single heating chamber. After a pack has been sealed on an L-bar, side or PE sealer, it rides through on the conveyor while hot air shrinks the film tight and even.\u003c\/p\u003e\n\u003cp\u003eThe T-150 has a 59″ wide conveyor belt and a 16″ high tunnel opening. Adjustable flaps direct the airflow, and the conveyor speed sets the time in the heat. It runs on 480 V three-phase, 75 A; no compressed air is required.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 75 A (other voltage configurations available). Not for standard 120V outlets.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003ctd\u003ePrice shown is for the standard machine without options. Freight, wood crating and, where required, installation or training are quoted separately for each order.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSome applications require add-on features or a made-to-order machine. We confirm the final configuration in a written quote.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eInstallation and start-up by Maripak technicians available (quoted separately).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year manufacturer warranty on non-wear parts (Maripak)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable once the order has been confirmed in writing. Returns require our written Return Authorization. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips by freight from Maripak USA in Allentown, Pennsylvania\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle heating chamber with the heater and fan built into the bottom of the tunnel\u003c\/li\u003e\n\u003cli\u003eAdjustable flaps and channels direct the hot air, so tall, flat or open-ended packs each shrink evenly\u003c\/li\u003e\n\u003cli\u003eAdjustable conveyor speed sets the dwell time in the heat to match film type and thickness\u003c\/li\u003e\n\u003cli\u003eDouble-layer insulation reduces energy consumption and keeps the outside of the tunnel cooler\u003c\/li\u003e\n\u003cli\u003eAutomatic cool-down to 165 °F before switch-off protects the conveyor belt\u003c\/li\u003e\n\u003cli\u003ePower consumption 43 kW \/ 24 kW (max. \/ average); no compressed air; on casters with brakes at a 34″ working height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShrink lines with an L-bar or side sealer that feeds packs up to the 59″ belt width\u003c\/li\u003e\n\u003cli\u003eFood, beverage and consumer goods producers wrapping cartons, trays and multipacks\u003c\/li\u003e\n\u003cli\u003ePE bundling lines, with the optional ironing rollers and exit cooling fan\u003c\/li\u003e\n\u003cli\u003eLines that need even, tight shrinking at a steady production speed\u003c\/li\u003e\n\u003cli\u003eWet or food areas with the optional stainless steel version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eSingle chamber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompressed air\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e480V three-phase, 75 A (other voltage configurations available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption (max. \/ average)\u003c\/th\u003e\n\u003ctd\u003e43 kW \/ 24 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTunnel door height\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConveyor belt width\u003c\/th\u003e\n\u003ctd\u003e59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMobility\u003c\/th\u003e\n\u003ctd\u003eCasters with brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking height\u003c\/th\u003e\n\u003ctd\u003e34\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e82\" × 87\" × 59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePalletized size\u003c\/th\u003e\n\u003ctd\u003e88 × 94 × 67\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e3527 lbs \/ 3902 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eSpecifications per Maripak USA product information (October 2026). Values that were unclear in the manufacturer's data are not shown here; they are available on request, together with dimension drawings.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eAvailable factory options\u003c\/h3\u003e\u003cp\u003eOptions are built in or supplied by Maripak and are quoted together with the machine. A machine with options is configured to order.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlternative conveyor belts: wire mesh, Teflon mesh or plastic mesh\u003c\/li\u003e\n\u003cli\u003eOther voltage and amperage configurations\u003c\/li\u003e\n\u003cli\u003eHigher chamber and frame designs\u003c\/li\u003e\n\u003cli\u003eIroning rollers and cooling fan at the exit for PE-wrapped packages\u003c\/li\u003e\n\u003cli\u003eExhaust hood\u003c\/li\u003e\n\u003cli\u003eStainless steel version\u003c\/li\u003e\n\u003cli\u003eOn-site installation, start-up and operator training by Maripak technicians (quoted separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003ePer Maripak, the machine carries a 3-year warranty on non-wear parts against manufacturing defects or faults; the warranty can be extended in 1-year increments at additional cost. Wear parts are not covered by the warranty. One set of wear parts is supplied with the machine. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maripak","offers":[{"title":"Default Title","offer_id":54960188424530,"sku":"MPK-T-150","price":67900.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/T150_01.jpg?v=1791317358"},{"product_id":"aie-infrared-shrink-tunnel","title":"AIE Infrared Shrink Tunnel","description":"\u003cp\u003eAIE infrared shrink tunnels shrink the film around products after they have been sealed in an L-bar or I-bar sealer. The sealed pack rides through on a conveyor while the heat shrinks the film tight.\u003c\/p\u003e\n\u003cp\u003eThe AIE-S3515 has a 14″ × 6″ tunnel opening and heats from 4 sides with 10 replaceable infrared tubes (5 kW, 220 V). Its conveyor speed is adjustable up to 20 ft\/min, and the upper and lower heaters have separate temperature controllers. Larger openings of 16″ × 8″ and 16″ × 12″ and a version with stand are available; their data is on request.\u003c\/p\u003e\n\u003ctable class=\"key-facts\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e220 V (AIE-S3515, per AIE); other models on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e180-day manufacturer warranty from the date you receive the equipment (AIE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReturns\u003c\/th\u003e\n\u003ctd\u003eNon-returnable unless AIE approves the return in writing. Returns only with our written Return Authorization. Report damage, defects, missing or wrong items in writing with photos within 5 business days of delivery. See our \u003ca href=\"\/policies\/refund-policy\"\u003eReturn \u0026amp; Refund Policy\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping\u003c\/th\u003e\n\u003ctd\u003eShips from AIE in City of Industry, California, by UPS or LTL freight. Freight is quoted before you pay.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eLead time on request.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInfrared heating from 4 sides with 10 replaceable tubes (AIE-S3515, 5 kW)\u003c\/li\u003e\n\u003cli\u003eSeparate temperature controllers for the upper and lower heaters\u003c\/li\u003e\n\u003cli\u003eConveyor speed adjustable up to 20 ft\/min (AIE-S3515)\u003c\/li\u003e\n\u003cli\u003eTunnel openings 14″ × 6″, 16″ × 8″ and 16″ × 12″; 14″ × 6″ also with stand\u003c\/li\u003e\n\u003cli\u003eCasters make the tunnel easy to move; Teflon mesh conveyor belt optional\u003c\/li\u003e\n\u003cli\u003eAIE-S3515: 220 V, 48″ L × 24″ W × 20″ H, 176 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFood items, books, toys and stationery, as named by AIE\u003c\/li\u003e\n\u003cli\u003ePharmaceuticals, parts and hardware in retail shrink packs\u003c\/li\u003e\n\u003cli\u003eBusinesses moving from a heat gun to consistent tunnel shrinking\u003c\/li\u003e\n\u003cli\u003eAIE L-bar and I-bar shrink systems that need a matching tunnel\u003c\/li\u003e\n\u003cli\u003eSmall production lines with packs up to 16″ wide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTunnel size (W × H)\u003c\/th\u003e\n\u003cth\u003eNote\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515\u003c\/th\u003e\n\u003ctd\u003e14\" × 6\"\u003c\/td\u003e\n\u003ctd\u003eData below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S1406\u003c\/th\u003e\n\u003ctd\u003e14\" × 6\"\u003c\/td\u003e\n\u003ctd\u003eWith stand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S1608\u003c\/th\u003e\n\u003ctd\u003e16\" × 8\"\u003c\/td\u003e\n\u003ctd\u003eData on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S1612\u003c\/th\u003e\n\u003ctd\u003e16\" × 12\"\u003c\/td\u003e\n\u003ctd\u003eData on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable class=\"specs\"\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515 heater\u003c\/th\u003e\n\u003ctd\u003e5 kW, 10 infrared tubes, heating on 4 sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515 voltage\u003c\/th\u003e\n\u003ctd\u003e220 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515 conveyor speed\u003c\/th\u003e\n\u003ctd\u003eUp to 20 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515 dimensions\u003c\/th\u003e\n\u003ctd\u003e48\" L × 24\" W × 20\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAIE-S3515 weight\u003c\/th\u003e\n\u003ctd\u003e176 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cem\u003eData per AIE (theaiecompany.com and AIE instruction manuals, October 2026). Metric values are AIE's; inch\/lb values are converted and rounded. Custom lengths and seal widths are available from AIE on request.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eAIE warrants its products for 180 days from the date you receive the equipment. US Packing Equipment passes the manufacturer warranty through to you and does not give a warranty of its own. See our \u003ca href=\"\/policies\/terms-of-service\"\u003eTerms of Sale\u003c\/a\u003e.\u003c\/p\u003e","brand":"AIE","offers":[{"title":"14\" × 6\" (AIE-S3515)","offer_id":54995282035026,"sku":"AIE-S3515","price":4073.0,"currency_code":"USD","in_stock":false},{"title":"14\" × 6\" with stand (AIE-S1406)","offer_id":54995282067794,"sku":"AIE-S1406","price":4560.0,"currency_code":"USD","in_stock":false},{"title":"16\" × 8\" (AIE-S1608)","offer_id":54995282100562,"sku":"AIE-S1608","price":5537.0,"currency_code":"USD","in_stock":false},{"title":"16\" × 12\" (AIE-S1612)","offer_id":54995282133330,"sku":"AIE-S1612","price":5648.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1108\/8144\/0082\/files\/AIES3515-1.jpg?v=1791491106"}],"url":"https:\/\/uspackingequipment.com\/collections\/shrink-tunnels.oembed","provider":"US Packing Equipment","version":"1.0","type":"link"}