Maripak spare parts keep Maripak shrink packaging machines running. This collection currently lists the SPKTMCv1 recommended spare parts kit for the TMC Pro series, the L-bar sealer and shrink tunnel combination. Parts for other Maripak machines are available on request by machine model and part number.
Ships from the manufacturer
$2,999.00
View details & quoteNo products match these filters.
Maripak recommends keeping a set of wear parts on site, so a worn part does not stop production while a replacement ships.
The Maripak SPKTMCv1 kit contains recommended spare parts for the TMC Pro 5844-M and 8065-M, 22 line items per Maripak. The list of contents is available on request, so you can compare it with the parts you already have.
On L-bar sealers, sealing wires, Teflon covers and silicone sealing pads wear with use. Maripak supplies one set of wear parts with many of its machines.
A machine that waits for a part costs production time. A recommended kit puts the most common wear parts on site from the start, so your maintenance team can replace them during a planned stop instead of during a rush order.
For parts not listed here, send us the machine model, the serial number and a photo of the part. We request the part number and price from Maripak USA and send you a written quote.
Clean the sealing area regularly, because film residue on the wire and the Teflon cover affects the seal. Check the silicone pad for cuts and the Teflon cover for burns, and replace them before seals start to fail. On machines with tunnels, keep the belt and airflow channels clean.
Maripak parts ship from Maripak USA in Allentown, Pennsylvania. Shipping is stated in your written quote.
| Model | Brand | Type | Key specs |
|---|---|---|---|
| Maripak SPKTMCv1 Recommended Spare Parts Kit for TMC Pro Series | Maripak | Spare part | Part no. SPKTMCv1; 22 line items, per Maripak; Fits TMC Pro 5844-M and 8065-M |
See the machines in the Maripak collection and on the Maripak brand page.
Per Maripak, the kit contains 22 line items of recommended spare parts for the TMC Pro 5844-M and TMC Pro 8065-M. The detailed list of contents is available on request, so you can check it against the parts you already keep.
Yes. Send us the machine model, the serial number and a photo of the part. We request the part number and price from Maripak USA and send you a written quote before you pay. Parts are original Maripak parts that match your machine.
On L-bar sealers, the sealing wire, the Teflon covers and the silicone sealing pad wear with use. Maripak supplies one set of wear parts with many machines. Keep a second set on hand if the machine runs every day, so a worn part never stops the line.
Maripak parts ship from Maripak USA in Allentown, Pennsylvania. Shipping is stated in your written quote before you pay. Small parts usually ship by parcel carrier, and kits can ship together with a new machine on the same freight to save a separate delivery.
0 selected (up to 4)
FREE SIZING TOOLS
Quick calculators that run in your browser – no email required. Use the result to request a quote with your numbers.
Shrink Film Calculator
Centerfold film width, cut length per package and packages per roll.
Use the calculator
L-Bar Sealer & Tunnel Selector
Seal area and tunnel opening for your package, with matching Maripak machines.
Use the calculator
Vacuum Sealer Selector
Seal length and sealer type for your bag width, gas flush and clean room needs.
Use the calculator
Pallet Shrink Calculator
Shrink cover size, film per day and whether a heat gun, Multicover or Turbopack fits.
Use the calculator
